View Single Post
Old Jul 16, 2008, 09:59 PM
pval3 is offline
Find More Posts by pval3
Registered User
pval3's Avatar
raleigh, NC usa
Joined Aug 2001
1,993 Posts
delays

hey folks

Been working working working at work and no time at home to do any hobby stuff!

I wanted to at least give a little update and some observations.

I layed out the cores tonight to get an idea of span and config. Also trying to figure out if I can fit my 3000 mah lipo in the nose without it poking though the top!

From what I can see, the lipo issue will work as long as I use CKs gorilla glue and henry's on the floor to keep it as thin as possible. I should just be able to get that 4s in there as long as I use a thin battery box cover!

In so far as the overall layout, the wing appears to have a little more epp than the 36" proportionally. It seems to also have a little more wash out in the tips than the 24 and the 36 also. This should make it very stable in slow flight mode.

I wanted to try to see how much meat there was for larger servos, with a 4s I will need more torque and a little stronger gear set than what the std. micro servos will afford.

Cutting was great and clean. Jeff does a phenomenal job with these cores
pval3 is offline Find More Posts by pval3
Reply With Quote