RC Groups

RC Groups
    Electric Plane Talk
        Video Dollar Tree Foam Eagle

#1 Rookiepilot2003 Jan 19, 2009 08:59 PM

Dollar Tree Foam Eagle
 
1 Attachment(s)
This is my dollar tree foam eagle that i recently built. I hope you enjoy the video.

thanks for viewing!

#2 Sir Raleigh Jan 19, 2009 10:21 PM

WOW! What a bird...

Got more pics?
Maybe some of the build?

Bill

#3 Rookiepilot2003 Jan 19, 2009 10:26 PM

sorry no build pics since i wasn't even sure if it was gonna be a success. Basically used the plans for the FFF Eagle with few little modifications to suit my needs. I will try to take some close up pics and post if you are interested. Thanks for your comment.

#4 Ronstar Jan 20, 2009 12:35 AM

Looook up in the sky :censored: ....is it a bird ?..... is it a plane ?....no....its........an Eagle ! :cool:

#5 Sir Raleigh Jan 20, 2009 01:00 PM

Quote:

Originally Posted by Rookiepilot2003
sorry no build pics since i wasn't even sure if it was gonna be a success. Basically used the plans for the FFF Eagle with few little modifications to suit my needs. I will try to take some close up pics and post if you are interested. Thanks for your comment.

Yes, please post whatever pics you can. I'd like to see the layout of all the equipment.

At first I thought it was just a flat foamy, but then when it landed I saw it has a fuselage.

Thanks,

Bill

#6 Rookiepilot2003 Jan 20, 2009 06:00 PM

10 Attachment(s)
Here are a few pics of the Fuselage. The Wing is basically a kfm3 with each layer of feathers being a step. Provides great glide characteristics and makes the wing extremely stiff.

#7 Sir Raleigh Jan 20, 2009 06:23 PM

That looks like it would be soooooo easy to build using BlueCor (FFF).

What wing span?
What size motor? (I can probably figure out everything else.)
Do you have any plans?
The fuselage looks easy enough, but plans would be great for the wing.
Might also put in a monoblock in place of your pink firewall like what's on the Blu-Baby.

Bill

#8 Rookiepilot2003 Jan 20, 2009 07:17 PM

I posted the plans above with the pictures. This is the design of Paul (Praymond) from rcgroups. The span is 56 inch but there is a 42 inch also available. The motor is 1000kv and its from bp hobbies http://www.bphobbies.com/view.asp?id...7&pid=B1688512 , spinning a 9x7 sloflyer prop. It gets about 1 to 1 thrust which is ok if you are just gonna fly the eagle in a realistic manner. I might also increase the prop size to 10in later on. I hope this helps.

#9 Sir Raleigh Jan 20, 2009 08:36 PM

Excellent!!!

Thank you very much.

Bill

#10 soloedin6hr Jan 20, 2009 08:52 PM

Great video, nice and close, well done.

Thanks

#11 Rookiepilot2003 Jan 20, 2009 09:54 PM

Thanks everyone for viewing the video and the great comments. I have my girlfriend Felicity to thank for doing a great job filming the flight and also for motivating me to continue building, flying, and to actually post a video of one one of those flights. She surprised me with more sheets of foam so I gotta go and do some building. Happy flying, Haris

#12 Sir Raleigh Jan 20, 2009 10:20 PM

Enjoy building, Haris, and keep the fantastic videos coming.

And my congratulations to Felicity for being such a great videographer.

Bill

#13 High Flyin' Jan 21, 2009 06:33 PM

Rookiepilot

Nice looking and flyiing Eagle!

I am thinking about building the 42" version out of Protection board and would like to ask a couple of questions. I want to try a RET for my wife and liked the way you did your setup.

Will your eagle make loops? How did you decide on the size of the Rudder? How strong is the body as far as twisting, I was thinking about maybe doing a monoblock? How much dihedral do you have in the wing?

Thanks again for the video and the great pictures of your eagle....nice job on the feathers!

Ray

#14 Rookiepilot2003 Jan 21, 2009 07:03 PM

Hello Ray,thanks for the comment,
the eagle can do everything the vtail version can. You can even add ailerons if you like. Dihedral is about 4 degrees if I am not mistaken and that is from half span to the point where the larger kf step is, then that part is bent up another 4 degrees. So the Wing itself has 4 degrees and the tips have another 4 from there. This way it turns out very stable and can make fairly tight turns.
As for the rudder, I just kinda eyeballed it and took half horizontal stab and reduced it a bit to make that the vertical stabilizer then took about 3/4 of the way back and made that the rudder. You can make it larger or smaller depending on your needs.
The fuselage is very stiff if you build it according to the plans. I didn't use any reinforcement there and monoblock would definetly work well.

I hope this helps, if you would like me to go into more detail I would be more than happy to do so. It is a fairly straight forward bird to make as Paul did a great job drawing the plans. Good luck with your build and post some pics if you can so we can see how it is coming along.

#15 larryross Feb 20, 2009 05:49 PM

Do you have an untiled version of the plans?

Larry


Quote:

Originally Posted by Rookiepilot2003
Here are a few pics of the Fuselage. The Wing is basically a kfm3 with each layer of feathers being a step. Provides great glide characteristics and makes the wing extremely stiff.



All times are GMT -5. The time now is 11:40 PM.