RC Groups

RC Groups
    Foamies (Scratchbuilt)
        Idea Scratch builder paint tips / ideas: instructional videos

#1 adreher Jan 16, 2009 02:15 PM

Scratch builder paint tips / ideas: instructional videos
111 Attachment(s)
Hey guys,

First of all, I do realize that there is a forum dedicated to painting. But is you all are like me, you probably just hang out around this forum, and don't travel to them all. Therefore, I thought it would be a good idea to start a scratch builders paint thread.

I want this thread to be many things. I want it to be a place for tips on how to paint your foamies. As we all realize, we can all benefit from others knowledge. I also want it to be a place to place picture of your painted planes to give others ideas of schemes to paint their planes.

I am by no means a professional, or even the best painter on the forums (there are some amazingly talented people on here, gary:)), but I have learned a few things I hope can help people out. All the things I have to share I have learned from trying it or from others on rcgroups, I would just like to focus it into one scratch builders thread.

So this being said, below is a video of me painting a plane. Yes, I know it sounds riveting. It is long, like 30 minutes, but it goes through the process I use to mask and make a design. Your best bet might be to get it going, stop it and let it load completely then watch it, otherwise it might glitch and stuff.

Painting a Firefly (37 min 9 sec)

Airbrushing a Yak (5 min 8 sec)

Here is a link to another thread about painting using some different techniques.

Paint thread

I am also going to be attaching some pictures of planes I have painted as well as others to give some ideas. Please post your painted planes so I can steal your idea!

#2 adreher Jan 16, 2009 02:18 PM

Using rattle cans
Untitled (17 min 5 sec)

short video on painting metal panels
Airbrushing Metal panels (11 min 33 sec)

A good video on thinning your paint.
Airbrushing - How to thin your paint - Quick Tip (3 min 6 sec)

Getting your airbrush to flow well
Airbrushing Basics - how to get your airbrush flowin nice (9 min 7 sec)

Airbrushing basics, changing colors, disassembly, airbrush
Airbrushing basics, changing colors, disassembly, airbrush (7 min 38 sec)

Here is a link to Airbrush Tips youtube site. LOTS of good instructional videos. Thanks rc cal for finding these for us!
Airbrush Tips Youtube site

Good thread with information on airbrushing and laminating film, thanks Lee!

Great tutorial of how to airbrush a foamie. Thanks snap!
airbrushing a foamie

Lots of awesome planes here!
Great foamie paint thread

#3 Rusty-Gunn Jan 16, 2009 02:32 PM

Your planes look cool. I like them. My stuff is simple, just a few Sharpie markers, a few patters, or ruler, and thats about it.

#4 leadfeather Jan 16, 2009 03:30 PM

I had the good fortune to watch Adam painting first hand. Great results and surprisingly easy if you follow the simple techniques in his video.

Two thumbs up for this thread Adam!

#5 Rusty-Gunn Jan 16, 2009 04:17 PM

If more poeple add how they do various "paint" jobs (Sharpies, paint, decales, etc), then I vote for to be an eventual Sticky, as it will be a valuable tool for the scratchbuilder.

#6 leadfeather Jan 17, 2009 07:28 AM

Sharpie + paint
1 Attachment(s)
Here is a paint job I did that looks OK and was very easy to do.

On this Bluecor build I drew/colored the tiger stripes and canopy first with a black sharpie.

Next I over coated the plane with red Krylon H2O paint except for the very bottom where I used some yellow Krylon H2O.

No masking at all, very easy to do with Sharpies and rattle cans.

#7 rmgmag Jan 17, 2009 08:09 AM

This should really help me a lot. I build, I can fly, but I can't paint worth s$%#.

#8 going4speed Jan 17, 2009 08:42 AM

What airbrush do you use?

#9 xj35s Jan 17, 2009 09:37 AM

Very nice. Thank you, I've done some airbrushing on a snowmobile cowl years ago. I'd like to see an example of how you do the lightining bolts. That bipe looks great.

I'm going to try the riveted aluminum look on mine using sharpies and some spray. I'll post a pic when done.

#10 TerryE Jan 17, 2009 09:40 AM

Great idea - subscribed.

I just use rattle cans, but a tip (?) I learned a while ago was to get one of the plastic handles that attaches to the spray can. Makes it a lot easier to control the painting.


#11 Trouble Maker Jan 17, 2009 11:27 AM

What took you so long! Look good thanks Adam.


#12 adreher Jan 17, 2009 11:34 AM

Hey, thanks guys. Keep posting pictures and ideas!

I use an Iwata eclipse.

I will try to get some more video's done, but I'll have to make some more planes before I can paint them. :)

Here is a video about painting lightning. I don't use the blue and stuff, I just use white, but it's a good example of how to do it.


#13 ewo Jan 17, 2009 02:47 PM

11 Attachment(s)
I dont have videos, but i have pictures of a couple of my favorite paint jobs.

All rattle can and masks.I use lots of pins and heavy objects to hold masks in place

Great thread by the way.
More videos please:cool:


#14 larryross Jan 17, 2009 03:03 PM

I always wondered why there wasn't a thread like this here. Foamy Scratch builders finish differently because they are working with different materials. Should include paint and all forms of finish and sub finishes. IMHO

Should be a sticky too.
Good for you adreher.:D

#15 rc cal Jan 17, 2009 03:45 PM

Thank You for sharing your techniques.


All times are GMT -5. The time now is 05:50 PM.