RC Groups

RC Groups
    Radios
        Discussion 4 Wing Crow, how to program flaps to a slider on the 9C

#1 Howemd Jun 15, 2008 07:51 AM

4 Wing Crow, how to program flaps to a slider on the 9C
 
Hello y'all,

I am trying to fine tune my ultra stick 'crow' and would like to not only be able to just hit a switch and have 'crow' activated, but to also be able to use a Vr slide to just lower flaps.

-- Percentages have been made for easy mental math --

Currently I have figured out how to program all four wing control surfaces to follow each other in normal flight (ailerons 100% deflection and flaps following at 50% deflection) with Crow linked to switch H.

Is there a way to also program just the flap down deflection to be controlled with a Vr switch not activating 'Crow'.

Thanks in advance

#2 flyfalcons Jun 15, 2008 10:49 AM

Hey Howemd, try a pmix Vr - Flap channel (whatever channel that is, I think it's 6?). Set the mix to switch H for when you are in the normal flight switch position, that way it won't interfere with your crow mixing. Let us know how that goes.


All times are GMT -5. The time now is 10:10 PM.