RC Groups

RC Groups
    Power Systems
        Will the new CP1300's be suitable for this?

#1 Slope Nut May 21, 2001 01:05 PM

Will the new CP1300's be suitable for this?
 
I understand that the Sanyo 800AR/AE class cells are being replaced with a new cell designated as CP-1300 (same weight as the 800's but higher capacity). I am no engineer (ask my buddies http://www.ezonemag.com/disc/smile.gif), so I need some help.

I am running 8x800AR's in my Rittinger Sport Twin, which is a ~28 ounce twin speed 400 with CAM 5x5 props. I put the 800 pack in stick configurations so they fit into the front of the fuse. Will the CP-1300's increase the run time without diminishing my performance? Can you charge the new cells at 3amps or so?

Thanks,

Greg

#2 Andy W May 21, 2001 01:44 PM

From my own limited experience, yes and yes.
..a

#3 Ralph Weaver May 21, 2001 01:48 PM

The CP-1300SCR cells have more capacity, less internal resistance and the same weight as the 800AR cells. See www.magtechinc.net/Cells.htm for more info.

#4 sf_247 May 21, 2001 02:19 PM

IT seems that the CP-1300 are an all around better cell, even for the internal resistance. If the 800 AR could handle it, the the CP-1300 could as well, and for 50% longer. Nice.

Shawn
eflightpower.com

[This message has been edited by sf_247 (edited 05-21-2001).]


All times are GMT -5. The time now is 06:34 AM.