RC Groups

RC Groups
    Aircraft - Sailplanes (FS/W)
        Sold Unobtanium Russ Thompson DC-3 / C-47 PSS fuse & cores

#1 surfimp Feb 19, 2006 10:58 AM

Unobtanium Russ Thompson DC-3 / C-47 PSS fuse & cores
 
4 Attachment(s)
Unobtanium Russ Thompson DC-3 / C-47 PSS fuselage and wing cores by Target.

Fuse was laid up by Ray H from Russ's molds. Layup is pretty heavy, Ray builds for Fermin so this ain't no wimp. Molded in hatch and hatch cover included. Big roomy fuse with enough space for just about anything you could ever want to do.

Wing cores cut by Target. They are some of the sweetest wing cores I've ever seen, use the superfast Don Ayers A7515 foil and build out to a 63" span (making the plane build to a perfect 1/16 scale). Wing is three pieces for scale accuracy. I had intended to scratchbuild nacelles, but you could build it without them if you wanted.

Cores are cut with the idea of having 1/4" basswood sub trailing edge and a 1 1/2" balsa trailing edge. I was planning to sheet them with 1/32" ply, but you could use balsa or ply or whatever you like.

Have templates for fin and elevator which need to be created from balsa, ply, basswood or whatever you prefer.

These planes build out to around 80oz. plus (I think Ray flies his at over 100oz.) This is a genuine sled opportunity for anyone who thinks they can handle it. Can you handle it?? :D :D :D

Asking $130, buyer pays shipping. Am selling because I don't get to Fermin as much as I'd like, and because I want to get a big molded plane.

Steve

#2 BeeDee Feb 19, 2006 07:30 PM

82 views and no replies? Man people are just daring me to buy this Steve...


BD

#3 droydx Feb 19, 2006 09:03 PM

Esteban,
What's the deal with the masking tape, do the fuse halves still need to be joined?

Andres

#4 surfimp Feb 20, 2006 08:38 AM

Plane is sold. Thanks!

Steve


All times are GMT -5. The time now is 06:26 PM.