RC Groups

RC Groups
    3D Flying
        Smove from Manuel Nubel

#1 Twinkletoze Dec 18, 2005 08:09 PM

Smove from Manuel Nubel
 
Well I threw together a "Smove" from Manuel Nubel. The plans came out last week and it looks pretty good. It has sort of stationary speed brake struts. :D

#2 bamm Dec 18, 2005 08:37 PM

why the heck to you have the struts like that??????? :confused: :confused: :eek: looks good though :cool:

#3 Twinkletoze Dec 18, 2005 08:41 PM

It looks like it was to slow down "downlines" and I guess generally control speed . Maybe for the F3B schedule????? :D

#4 Ryguy Dec 18, 2005 08:45 PM

Also looks like it helps keep both wings from moving side to side.

#5 pmackenzie Dec 18, 2005 08:51 PM

Cool. I see a biplane in my future.
The plans are available for download at http://www.slope-combat.de/shop/.
No email two step like with the Knuffel.
Pat MacKenzie

#6 Daniel Z Dec 18, 2005 11:05 PM

have anyone seen the video?? pretty impressive!!

#7 bamm Dec 19, 2005 11:59 AM

whats the WS on this beauty? I see that it looks like you are using a LittleScreemer on it.
I wonder how a CustomCDR would work... i'm sure it will ROCK with it!

#8 Trisquire Dec 19, 2005 12:29 PM

1 Attachment(s)
Permanently deployed "airbrakes" on Martin Müller's TwinSai 2 for improved "constant speed flying".

#9 bamm Dec 19, 2005 04:17 PM

I don't get it............ I would say your flight time would be cut down alot with those

#10 j_z_123 Dec 19, 2005 04:58 PM

It's not about flight time. It's about constant precision and speed throughout the pattern.

#11 bamm Dec 19, 2005 05:04 PM

oh ok. soo... these are good for comp then..... hmmmm i'm gunna have to try this out! lol

#12 Twinkletoze Dec 19, 2005 06:29 PM

I tried the first flights on the Smove outside at dusk today. This thing really grooves and really has a nice slooooowwww flight. High alpha knife edge is graceful and smoooth. Feels much better than my F3A shocky. Feels closer to a pattern plane than any other flat foamie that I've tried. If you like the Knuffle you will like this one, just keep the weight down. My .02.

Char :D

Forgot to add; The nose is hand cut EPP and makes a huge improvement. One of the elevator pull-pull lines came loose and the Smove went nose in with no damage. The other benefit seems to be in quieting down motor noise transmitted through the airframe. ;)

#13 pmackenzie Dec 19, 2005 07:15 PM

What equipment did you use, and what is the AUW?
Thanks,
Pat MacKenzie

#14 j_z_123 Dec 19, 2005 07:17 PM

Quote:

Originally Posted by Daniel Z
have anyone seen the video?? pretty impressive!!

Do you or anyone else have a direct link to the video?

Jon

#15 Twinkletoze Dec 19, 2005 07:25 PM

Hi Pat,

Two 5.5 gram generic servos, One HS55 for ailerons.
CC10 and 17t Little Screamer GWS 8x4 prop
Vampower 11.1v 620 battery
GWS receiver

I don't have a scale yet to weigh it.

Glued the 3mm Depron with GWS glue and used pull-pull on elevator and rudder.


J Z 123 try this
http://slope-combat.de/shop/index.ph...index&cPath=56

:D


All times are GMT -5. The time now is 01:12 AM.