RC Groups

RC Groups
    Foamies (Kits)
        Bluecor for beginners?

#1 ArcherAce May 10, 2002 03:26 AM

Bluecor for beginners?
 
Is there a website, or a thread that goes into detail on how to make a plane out of bluecor?

Some of the planes that i've seen here look fantastic! But where do you start? All of the threads here go beyond the newbie in explaining what was done.

#2 rtideas May 10, 2002 04:42 AM

This guy's been kind enough to put some plans out.

http://www.geocities.com/genebond/

rt

#3 KillerAir May 10, 2002 07:58 AM

Take a look through the fanfold thread started by 'emoone'. There is a lot of useful info that has been gathered over the last 1000 entries.... Godd luck and if you have any spcific questions don't hesitate to post, most of the zoners here will be more than willing to share their 2 cents.

#4 rtideas May 10, 2002 09:24 AM

Here's that glorious thread KillerAir mentioned:

http://www.rcgroups.com/forums/showt...threadid=25136

Lot's to go thorough, but tons of inspiration.

Some people plan their planes out. Some design and build as they go using the TLAR or the TSAR method--That Looks About Right or That Seems About Right.

rt

#5 emoone May 10, 2002 11:48 AM

ZagNutz BlueCore Flying Wing:
http://home1.gte.net/texhills/index.html

Here's another thread on Ezone that looks interesting:
http://www.rcgroups.com/forums/showt...ighlight=heart

Pibros [ normally Depron but can be modified for F3 ]
http://www.rc-soar.com/pibros/

F3 ( Fan Fold Foam ) FAQ:
http://groups.yahoo.com/group/hbfa/files/FAQs/f3faq.txt

Someone has already mentioned Genebond's BlueStick .... if you like small models its a winner.

Do a search for the Drenalyn as well. It's normally a Depron/Foamboard project but might could be modified for F3.

Hope this helps!


All times are GMT -5. The time now is 12:18 AM.