RC Groups

RC Groups
    Micro Cars
        problem with RC18T + presentation

#1 tom4 Jun 19, 2005 11:18 AM

problem with RC18T + presentation
 
Hi

I'm kinda new here, so:
hello everybody. i'm 29, I live in france, and usually post on the "rc motorcycle section".
I have a RC18T, a Ducati thunder tiger, a radioshack Ricky, a Emaxx and some other "collector" stuff I don't use that much
When I'm not running my models, I ride a 400FZR-R on track, or a mountain bike on street/dirt.

here is my problem:
I went out with the RC18T (bought new on may 20th, second time out), and after a few minutes, I had a noise just like if there were a ship of gravel IN the gear.
it's the second time it happens. Do you guys have any tips to avoid that?
I also lost a dogbone, But I just saw on Asso website they made a special part for that.

btw, is the RC18T a real offroad truck, or are you only supposed to use it indoor, with a few jump ??

thanks
tom4

#2 Tachikaze Jun 20, 2005 10:11 AM

The RC 18T is off road, as long as you keep in mind it is a small vehicle. We have an off road track that we race nitro and electrice 1/10 and 1/8th scale on. We have a seperate track for the RC 18T and Losi Mini T's. That track is shorter and is made with a much finer and better groomed surface.
The noise you are hearing most likely is gravel in the gears. It is a problem that we have noticed in both mini off road trucks. Try gluing a small piece of lexan or stryene in front of the pinion gear, that will help to deflect the dirt away from gears.

#3 tom4 Jun 20, 2005 02:19 PM

thanks for the tip, i'll try this

tom4

#4 smitty413 Jun 20, 2005 04:25 PM

I always ran my rc18t on the street, so I never really had a problem with the gear.

#5 Vintauri Jun 20, 2005 11:13 PM

It could also be the diffs slipping. THe RC18T is know for getting a little slop in the diffs after a few runs and needs some shims put in place.

This fix and other good fixes for the RC18T can be found here http://www.e-maxximumrc.com/html/rc18t.html

#6 Capgun_Slim Jul 10, 2005 07:32 PM

You definetely have one of the 2 problems mentioned above. The diff shim problem, or there's a rock/pebble jammed inbetween the spur and pinion. Associated makes these shims available FREE to anyone who ones and 18t and even includes the shipping! All you have to do is call them.

Someone sells a full cover system for the 18t on Ebay for around $5.00, that eliminates rocks/pebbles from getting in there anymore while offroading.

#7 Plexabit Aug 23, 2012 02:46 PM

Quote:

Originally Posted by Capgun_Slim (Post 4006883)

Someone sells a full cover system for the 18t on Ebay for around $5.00, that eliminates rocks/pebbles from getting in there anymore while offroading.

Objection: I have an RC18T with every single type of cover available to my knowledge, and dirt STILL gets in it all the time! :mad:

#8 wparsons Aug 23, 2012 08:48 PM

Way to dig a thread up from 7 years ago!

#9 dhruvafreak Nov 08, 2012 09:30 AM

Servo replacement
 
just BROKED the servo !!!!!
thinking to get replacement , so which servo to get .
I have a 9g digital servo that fit properly but the motor become hot within seconds so no use and one 9g power HD analog servo which is long and cant be fitted
so what to get and from where???

#10 Plexabit Nov 08, 2012 02:17 PM

I agree with wparsons, however it's not 7 years old anymore. :D

I'd suggest the Hitec Mighty Feather servo. The HS-65MG. Or the HB if you're on a budget.

#11 dhruvafreak Nov 10, 2012 09:04 AM

hs 65mg seems good but the thing is NOT all the servos fits in this car !
You sure this one will work?

#12 Plexabit Nov 10, 2012 01:20 PM

Yep, positive. you have to file a little of the servo mount to get it to fit, and get the Hitec servo saver, but you don't need to drill any holes/get a new mount. Hope this helps! Make sure you get the HS-65HB/MG, not the HS-56. I think the 56 fits too, it's just not as strong.


All times are GMT -5. The time now is 04:38 AM.