RC Groups

RC Groups
    GWS (Grand Wing Servo)
        Gallery GWS Model Notes and Pictures Vol III

#1 Michael Heer Apr 05, 2005 09:02 PM

GWS Model Notes and Pictures Vol III
 
Time to start Vol III. Vol II can be found at:http://www.rcgroups.com/forums/showthread.php?t=270923

#2 Jarhead Apr 06, 2005 11:40 AM

Check out these pics!
 
5 Attachment(s)
My buddy Jim with his new SS. The plane, the man. Jarhead ;) :D :cool:

#3 iter Apr 07, 2005 02:41 AM

2 Attachment(s)
Second-generation autogyro on a GWS stick fuselage - first Pico, now Slow Stick. Build thread here: http://www.rcgroups.com/forums/showthread.php?t=345049

#4 foamace Apr 07, 2005 06:15 PM

Estarter
 
3 Attachment(s)
My 1st Estarter/ aileron plane, currently flown w/ 350 c gear and 9x7 props on a 2cell lipo. Flys great, loops,rolls,spins and inverted are a lot of fun!

update 4-13-05 fatal crash into communications tower :eek: :D time to build another.

#5 onega Apr 08, 2005 09:16 AM

1 Attachment(s)
my 2nd P51D

Typhoon 15 motor
Phoenix 25 ESC
11.1V 2500mah lipo
9x5 cam (graupner) folding prop
Fully glassed; 20 OZ
Great , fast flier, endless vertical

#6 foamace Apr 08, 2005 04:26 PM

nice mustang! hey Onega, when you say fully glassed, what exactly do you use? i have read threads where they use clear polyurathane and other things.
how does one "glass" a plane?????

#7 onega Apr 08, 2005 04:41 PM

1 Attachment(s)
I used 25gr/m2 glass cloth and Zpoxy resin (as seen in pic)
This is the first warbird I glassed, and i'm very happy with the results, but it
takes far more time to build it, so be patient. But what you get is a very strong plane!
A full glassing tutorial can be found on http://www.gws-fans.com/

#8 tallflyer Apr 08, 2005 07:34 PM

My New GWS C47
 
5 Attachment(s)
Well I have to be honest I was not sure what to expect when I built the GWS C47 but I have to say it is one of the Best and easy to build kits I have built, I started out with the all silver version and as you can see I painted it amking it green and gray total build time was about 7 hours and If I had not been watching TV when I built it I think I could do it in like 4, I painted my plane with acrylic paint from Michaels craft store and applied it using my airbrush.

#9 Username Apr 10, 2005 02:28 AM

Gws P-51d
 
2 Attachment(s)
Here's my another contribution to this site:

#10 tkgavette Apr 13, 2005 09:54 AM

My Tigermoth
 
3 Attachment(s)
My Tigermoth Pics.

#11 foamace Apr 13, 2005 12:11 PM

TK that is the nicest TG i have seen! nice job.............

#12 jswjimmy Apr 13, 2005 01:40 PM

5 Attachment(s)
this is my slow stick as of april 13.

#13 gerard_nl Apr 14, 2005 05:24 AM

just wanted to share my me109

http://www.mvsb.nl/upload/fotoalbum/...96bc0ed873.jpg

#14 JABOMAN Apr 16, 2005 08:20 PM

Another Corsair
 
4 Attachment(s)
Here is my Corsair just recently finished. It is named "Bubbles" after a young lady whom I used to date.

I have modified the battery compartment to conform to panel lines on the original Corsair.

Gordon

#15 InspectorGadget Apr 16, 2005 10:57 PM

GWS Beaver at sunset
 
1 Attachment(s)
This is my first build with many essential modifications including:
Steerable tail wheel
Heavier gauge wire landing gear
Foam 2" main gear wheels
Bamboo rod under leading edge of wing
Additional wing strut
Bamboo on leading edge of elevator
Switch to turn off power to receiver
Strapping tape for elevator and rudder hindges
Main wing pinned and screwed on (no rubber bands).
I love the way if flies and it is a wonderful trainer. C-YA RL


All times are GMT -5. The time now is 12:43 AM.