RC Groups

RC Groups
    Racing Boats - Internal Combustion
        Soldering flex shafts

#1 slip knot Jul 12, 2004 12:04 PM

Soldering flex shafts
 
Any suggestions for soldering the ferrel to the flex shaft? I am using low temp silver solder and flux, however, the solder doesn't want to take. Any tips or suggestions are greatly appreciated.

#2 Ron Olson Jul 12, 2004 06:11 PM

Clean the cable thoroughly with something like acetone, then do it again.


All times are GMT -5. The time now is 05:27 AM.