RC Groups

RC Groups
    ServoCity.com
        New Product Hitec HS-7956SHR Rudder Tray Servo in stock!

#1 ServoCity Feb 22, 2013 04:30 PM

Hitec HS-7956SHR Rudder Tray Servo in stock!
 
BRAND NEW AND IN STOCK AT SERVOCITY!

HS-7956SHR Rudder Tray Servo
CLICK HERE: http://www.servocity.com/html/hs-7956shr_servo.html

Introductory Sale Price - Limited Time Offer!
$159.99 $147.99

http://www.servocity.com/assets/images/HS-7956SHR.jpg
Features:
- All-in-one Rudder Tray on Metal Top Case
- Large size ball bearing for 3.5 inch Rudder horn
- Metal turnbuckle pull-pull wire tensioner
- 2 cell Li-Po compatibles (6 cell NiMH)
- G2 Digital Amplifier w/ MOSFET drive
- Durable steel gears with dual ball bearing
- Ultra hardness gear shaft with 3 axial metal
- Heat sink for motor
- Water and dust resistant

http://www.servocity.com/assets/imag...SHR_bottom.jpghttp://www.servocity.com/assets/imag...d_hardware.jpghttp://www.servocity.com/assets/imag..._box_front.jpg

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 6.0-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 6.0-7.4 Volts
Operating Temperature Range: -20 to +60 C (-4F to +140F)
Operating Speed (6.0V): 0.15sec/60 at no load
Operating Speed (7.4V): 0.12sec/60 at no load
Stall Torque (6.0V): 277.74 oz/in. (20 kg.cm)
Stall Torque (7.4V): 340.24 oz/in. (24.5 kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Dead Band Width: 2usec
Motor Type: Coreless
Bearing Type: Dual Ball Bearings
Gear Type: Metal Gears
Connector Wire Length: 11.8 (30mm)
Dimensions: 1.57 x 0.79 x 1.45 (40 x 20 x 37mm)
Weight: 2.40oz (68g)


All times are GMT -5. The time now is 04:50 AM.