RC Groups

RC Groups
    Aircraft - Fuel - Engines and Accessories (FS/W)
        Found Webra headers

#1 williame3590 Feb 21, 2013 08:14 PM

Webra headers
 
2 Attachment(s)
Looking for two header pipes for the Webra 61 speed.
I just want to add them to this engine for display purposes.

Thanks

Bill

#2 Frank Klenk Feb 21, 2013 09:25 PM

Do you have any pics of what they looked like? Not that I have one. Maybe the Bisson boys could do you a repro?

#3 earlwb Feb 22, 2013 06:18 AM

I was thinking that it could use a Mac's tuned pipe header. The engines aren't drilled and tapped for a bolt on exhaust so you would have to use a clamp on unit. But it would be easy to make a tuned pipe header into a clamp on one. Another thought is that the Dubro Exhaust extension would work. You could cut it in half, and drill and tap the sides for a muffler clamp and then you would have two exhaust stacks. http://www3.towerhobbies.com/cgi-bin...?&I=LXD621&P=7

On one of my old Speed .61 engines I had to machine the exhaust outlet flat as it was still rough and unmachined. At the time I felt that was pretty sloppy for Webra to send the engine out like that. I fitted a clamp on Davis Diesel Development .60 size Soundmaster muffler to it.

Before correcting the problem
http://i248.photobucket.com/albums/g...y_model_02.jpg

After correcting the problem
http://i248.photobucket.com/albums/g...y_model_03.jpg

#4 barkleyb Feb 22, 2013 02:37 PM

Weber Speed Header
 
2 Attachment(s)
Have one header for 61 speed- it is milled for a perfect fit. $22 shipped in conus

#5 Lidman Feb 22, 2013 05:29 PM

Quote:

Originally Posted by williame3590 (Post 24210165)
Looking for two header pipes for the Webra 61 speed.
I just want to add them to this engine for display purposes.

Thanks

Bill

PM sent

#6 williame3590 Feb 22, 2013 07:42 PM

Thanks for all the responses guys and offers but I have decided not to add the pipes.
I don't want to drill the engine flange, just want to leave it original. Also I don't really want to look at the adjustable clamps. I'll just dispaly the engine as it sits and enjoy it.

Bill


All times are GMT -5. The time now is 01:54 PM.