RC Groups

RC Groups
    Castle Creations
        Discussion Testing a 10A BEC

#1 Murocflyer Feb 04, 2013 03:13 PM

Testing a 10A BEC
 
I was going to fly this morning but my Rx did not power up. I removed my BEC and then put the red wire back in from my T-Bird and the Rx powered up. It appears my BEC is bad. I re-soldered the connections thinking that may be the issue. -No luck.

Is there some testing I can do here, or do I need to send it in to see what the problem is?

Thanks,

Frank

#2 aero104 Feb 06, 2013 10:34 AM

...

#3 Murocflyer Feb 06, 2013 10:42 AM

Thanks for the info. That's what I figured as well. I am not getting any power coming from the BEC.

I'm wondering if it is worth sending back to CC.

Frank

#4 aero104 Feb 06, 2013 11:00 AM

...

#5 Murocflyer Feb 06, 2013 11:08 AM

It was out. I had been flying it a number of times before. This time on power up -nothing.

I'll check into the details on sending it back.

Thanks,

Frank

#6 aero104 Feb 06, 2013 11:14 AM

...


All times are GMT -5. The time now is 12:15 PM.