RC Groups

RC Groups
    Eagle Tree Systems
        Help! OSD video bouncing. Why? Please help.

#1 kolabuzlu Jan 26, 2013 11:08 AM

OSD video bouncing. Why? Please help.
Video coming from OSD starts to flicker/bounce just after Eagle Tree Systems boot.
Why does this happen?
Please help.
See the video below.
Best Regards.

Eagle Tree OSD Problem (0 min 16 sec)

#2 billpa Jan 26, 2013 05:10 PM

Hi, there are a couple of things that can cause that.

Could you please try the following:
1) try turning off telemetry. That is on the "Eagle Eyes" on-screen setup menu in the OSD, which can either be accessed via the radio sticks or the PC software.
2) Try turning down the white level, and/or increasing the black level. Those settings are in the "Display Settings" menu.

Let me know whether one of these resolves it, and we'll figure out next steps.

#3 secretspy711 Feb 18, 2013 05:48 PM

Does your video in or out port have the ground pin connected? Something similar happened to me when I disconnected the black wire. Doesn't look exactly like yours though, only the text was bouncing, not the entire video.

All times are GMT -5. The time now is 10:55 AM.