RC Groups

RC Groups
    Multirotor Electronics
        Discussion Please god ?? Give me this!!! - I CAN'T STAND IT ANY MORE

#1 saskya Jan 25, 2013 11:58 PM

Please god ?? Give me this!!! - I CAN'T STAND IT ANY MORE
 
a small board with spectrum integrated
just have to plug 4 or 6 esc and go fly
mini size if possible

I just can't find this, can you help

#2 spiked3 Jan 26, 2013 12:07 AM

http://www.horizonhobby.com/products...qx-bnf-BLH7580

#3 saskya Jan 26, 2013 12:24 AM

Quote:

Originally Posted by spiked3 (Post 23933895)

That board the esc are in it. - not separated

Please read my post

#4 flitelab Jan 26, 2013 05:06 AM

As noted a few times now there is no such board. Just buy a cheap HK orangerx and solder it to you board of choice.

#5 spiked3 Jan 26, 2013 07:03 AM

Quote:

Originally Posted by saskya (Post 23933985)
That board the esc are in it. - not separated

Please read my post

Yes, I see your edit after my post.

Don't be such a smartass.

Sounds like you've asked before and been told it doesn't exist, and yet you ask again, make that beg.

I don't know about your skills, but if I was as desperate as you say you are, it would be pretty easy to use the board from an mQX and plug my ESCs into it.

#6 2400RDR Jan 26, 2013 08:30 AM

Look at posts 531 and 538 on this page:

http://www.rcgroups.com/forums/showt...764146&page=36

Get a Flip and a Lemon Rx and make your own. That's probably about as good as it gets right now.

#7 AcroFPV Jan 26, 2013 10:11 AM

god hates you right now for bothering him over this.

#8 saskya Jan 26, 2013 10:33 AM

I hate him also loll

#9 spiked3 Jan 26, 2013 12:16 PM

Kinda hate to mention it at this point, but http://www.hobbyking.com/hobbyking/s...DSM2_Port.html has a satellite port. You need to bind it through a receiver AND you need to do you tuning through a regular receiver, but once that is done it flies with just the satellite. Its crap though, I've tried 2 days and gave up on it.

#10 saskya Jan 27, 2013 12:49 PM

ok here more god I want loll

a boad with spektrum with x4 or x6 - 15 to 20 amp esc
ready to solder brushless motor

and all this as small as possible , please god make it so loll

Hey guy lets make this thread funny

ask god what you want please stay in the subjet of Radio control stuff multirotors
or else it will be to wierd I could ask so much thing myselft

#11 kinderkram Jan 28, 2013 05:56 AM

Please God, make this girl find another hobby so she stops pulling everyone's chains here.

And while you're at it, please send her another set of ears! Her recent ones are obviously NOT made for listening.

#12 teslahed Jan 28, 2013 07:33 AM

I'm not sure it will be the best fit for that 50 pound quadcopter you are building;

http://www.rcgroups.com/forums/showthread.php?t=1727281

#13 mogupu Jan 28, 2013 07:39 AM

see:http://www.hobbyking.com/hobbyking/s..._GYRO_ACC.html

#14 saskya Feb 06, 2013 10:50 PM

Ho god
Please make this

a plug and play not a plug and pray
Receiver long range, 4 esc 40amp a control board with waypoints
and all this as small as possible in one piece
and please make it that a noob can use it in 1h
Plug and fly device
Thank you god

#15 Full_Tilt Feb 06, 2013 11:34 PM

Is it really that difficult to connect a receiver to the control board? Its as few as 4 wires, and you can get tiny receivers.


All times are GMT -5. The time now is 07:17 PM.