RC Groups

RC Groups
    Aircraft - Electric - Multirotor (FS/W)
        For Sale Polycarbonate Domes for Rusty's UAP1 Frames

#1 ross_badger Jan 24, 2013 08:58 PM

Polycarbonate Domes for Rusty's UAP1 Frames
 
8 Attachment(s)
For sale are UAP1 frame hemisphere domes that fit Rusty's UAP1 frames. The cost is $25 plus shipping for a standard hemisphere dome or $30 plus shipping for a hemisphere dome with a removable GPS sensor protection/mounting pocket.

PM me if you are interested, or log on to my website to order: www.BadgerFly.com

The dimensions: 134mm inside diameter, 67mm from flat flange to inside top of dome, 161mm diameter of flat flange, 5mm vertical flange lip.

Clear Polycarbonate Material

0.080" thick (2mm) clear polycarbonate dome weighs about 73 gms and is very strong to protect those expensive electronics. Polycarbonate (Lexan, Makrolon, etc) is the strongest plastic and won't shatter like acrylic, PET-G, and other clear plastics that you can buy at a cheaper price. These are the real deal if you care about your electronics!

The flange has indentations to line up with the UAP1 frame outer plate holes. If you would want to use screws or stand-offs to mount the dome, simply use the indentations to drill appropriate size holes. The dome can also be mounted using velcro.

This hemispherical dome can be purchased alone or with an optional GPS sensor unit pocket. The pocket fits perfectly at the top of the underside of the dome to protect the sensitive GPS unit or other electronics that need to be mounted above the flight control board. It can be attached with velcro or with nylon or aluminum screws (steel screws will affect the GPS signal). The mounting hardware is not included. Polycarbonate plastic will not affect the GPS signal.

#2 Askyvision Jan 25, 2013 02:11 AM

$30shipped I'll take one see how it fit my FY680, I want to fly during snow so this is good protection Thanks let me know

#3 ross_badger Jan 25, 2013 05:21 AM

Quote:

Originally Posted by Askyvision (Post 23923373)
$30shipped I'll take one see how it fit my FY680, I want to fly during snow so this is good protection Thanks let me know

Log on to www.BadgerFly.com to see my F450 and F550 frame domes with the dimensions shown. One of those may fit.

Otherwise, let me know what size would work for you and maybe I can come up with a custom dome for you.

Thanks, Ross

#4 Askyvision Jan 25, 2013 10:48 AM

3 Attachment(s)
do you think it will fit this? the bottom plate is 160mm i think

#5 ross_badger Jan 25, 2013 05:27 PM

1 Attachment(s)
Quote:

Originally Posted by Askyvision (Post 23926393)
do you think it will fit this? the bottom plate is 160mm i think

The dome for the F550 may fit....see the dimensions below


All times are GMT -5. The time now is 03:14 PM.