RC Groups

RC Groups
    Multirotor Talk
        Discussion KKMulticopter v5.5 Circuit board V2.3 Help

#1 Aaagogo Jan 21, 2013 12:42 PM

KKMulticopter v5.5 Circuit board V2.3 Help
 
Hi all,

I'm new to the site and building my 1st quad :D

however, I am stuck and can't seem to progress further and I hope that the more experienced members will be able to point me in the right direction.

Board - KKMulticopter v5.5 Circuit board V2.3 running FlyCam_XCopter_v2_9.hex

Transmitter/Receiver - Spring RC 661 6 channel

Problem - KK board is displaying a constant on blue light when I power it on, the receiver has a constant on red light.

The board makes it's usual beeps when plugged in.

When I power down the transmitter, the red light on the receiver blinks

I tried arming/disarming method, and have been reading and watching the videos that I can find but to no help.

I have attached a short video.

Powering Up KK Multicopter Board (0 min 22 sec)


Thank you

#2 Aaagogo Jan 21, 2013 10:22 PM

i took a leap of faith and reflashed the board with Quadrocopter v4.5 and I got it to work,

right after that, i broke snapped a prop.


All times are GMT -5. The time now is 05:13 PM.