RC Groups

RC Groups
    Aircraft - Fuel - Jets (FS/W)
        Sold JetPol GTM 85 polish turbine

#1 ecokopter.pl Jan 15, 2013 01:37 PM

JetPol GTM 85 polish turbine
 
1 Attachment(s)
The engine is in very good condition. He worked only 5 hours. Recommended review after 25 hours. I always worked on the JET A1 aviation fuel.

The set is all you need:
1x turbine
1x temperature sensor
1x fuel pump AERIOS 7
2x magnetventil
1x Moduł sterujący ECU
1x Module programming and operatingi GSU with LCD display
1x fuel filter
1x turbine guard
1x alu turbine mount
Other cables and accessories

Specifications:
static thrust: 85N
rotor speed at max power.: 120 000 rpm/min
minimum RPM: 33 000 rpm/min
fuel consumption: 310 g/min
fuel: JET A1 + 3% MOBILE Jet Oil II
electric starter
control computer
dimensions: length: 340mm, diameter: 110mm
weight: 1470g

images gallery: https://picasaweb.google.com/Dawid.e...COyy-9ba57jYFg

price: 1850$ + international shipping (to be agreed)
Please do not write in the subject!
PM only!

#2 mshay Jan 15, 2013 08:40 PM

_____________________*

#3 SteveT. Jan 15, 2013 10:50 PM

........

#4 ecokopter.pl Jan 17, 2013 02:52 AM

1800$

#5 ecokopter.pl Jan 19, 2013 05:35 AM

1750$

#6 Dr Honda Jan 20, 2013 08:17 AM

you can delete this if you like... But it's going to be hard to sell a used engine for the same price as a NEW KingTech K-80. They are $1750, and you can find them on sale for under $1700 once in a while.

Also... since there isn't any support for it in the USA... that will make it hard to sell also.

But... good luck.

#7 ecokopter.pl Jan 22, 2013 10:05 AM

KingTech = Taiwan
JetPol = Poland
Each decides what prefer ;)

but even lowers the price to 1650$

#8 mshay Jan 22, 2013 09:09 PM

Lower that thing to 200 America/U.S./Bucks/Dollars/Dough/Cash and I will buy it.

#9 ecokopter.pl Jan 23, 2013 05:51 AM

:D:censored:

#10 LJE4357 Jan 24, 2013 08:54 AM

Realisticaly
 
Quote:

Originally Posted by ecokopter.pl (Post 23892232)
KingTech = Taiwan
JetPol = Poland
Each decides what prefer ;)

but even lowers the price to 1650$

Realistically $500 to $600 is about all you will get. The biggest problem, NO SUPPORT. if the bearings go out, or internal parts are damaged, ( it happens all the time), there's no place to get repaired. At that point it's expensive junk. Your probably better off to sell it in Poland. BTW, Taiwan isn't China, the quality is a lot higher.

My 2 cents worth

#11 Alkaline Jan 24, 2013 02:41 PM

Quote:

Originally Posted by LJE4357 (Post 23914227)
Realistically $500 to $600 is about all you will get. The biggest problem, NO SUPPORT. if the bearings go out, or internal parts are damaged, ( it happens all the time), there's no place to get repaired. At that point it's expensive junk. Your probably better off to sell it in Poland. BTW, Taiwan isn't China, the quality is a lot higher.

My 2 cents worth

He's right:o

#12 txshan130 Jan 24, 2013 03:20 PM

very true

#13 mshay Jan 24, 2013 06:51 PM

Oh come on....I was hoping to get it for 200 bucks. Now you told him he could get 500-600, now that puts a dampner on my plans.

#14 mshay Jan 24, 2013 06:54 PM

Crap Dang shoot , there goes all my hopes and dreams for a jetpol turbine engine from pollock. :(

#15 ecokopter.pl Jan 26, 2013 07:03 AM

sold
thx for interesting
bye bye


All times are GMT -5. The time now is 12:19 PM.