RC Groups

RC Groups
    Hoverfly Technologies
        Help! My HFP does not yaw

#1 aok Jan 13, 2013 07:25 AM

My HFP does not yaw
 
Hello,

I have 350 flighthours on my hoverfly pro and im really happy with the board, but today I set it up on a new hexa and the hexa does not yaw.. The rudder dosent work.

Someone can help me? ? :)

#2 Stacky Jan 16, 2013 02:28 AM

I have had the same problem with 2 Hexas. I havent yet worked out exactly why as they are both working fine now but I susoect my radio rx is a possible cause. Are you able to try again but using a different radio and rx?

#3 aok Jan 18, 2013 12:45 PM

I dont think it is the radio because I have used exactly the same radio and model on another hexa with the same board, but I going to try tomorrow with an different radio ;) I come back with report ;)

#4 aok Jan 18, 2013 03:10 PM

Now I have tried to wire up everything again, but still the same problem :( Should try another radio tomorrow..

#5 aok Jan 20, 2013 05:45 AM

With new radio I still have the same problem :(

#6 Jlgz Feb 25, 2014 11:08 PM

I m having the same issue. Did you ever solve yours?

#7 vector57 Feb 26, 2014 06:48 AM

One thing to check is the placement of each motor controller and the connections to the flight controller. If you put two out of place, it will still fly, but many other problems result.

Kind of like switching Plug wires on the car. you will have a bad Miss on at least 2 cylinders.

#8 Stacky Mar 02, 2014 04:01 PM

I found that if my gain settings are too low then I have yaw problems.


All times are GMT -5. The time now is 12:54 AM.