RC Groups

RC Groups
    Micro Helis
        Discussion V911 Feasibility studies

#1 Diablos Dec 31, 2012 06:00 AM

V911 Feasibility studies
 
Hi Guys,

Ive noticed there is ALOT of info to be digested, And as the supergeek i am, My brain is just twitching to get started.

Problem is with so many mods being done, its hard to keep up. So i wanted to start a new thread which i will keep organized outlining the feasibility of these mods.

Going to basically copy and paste (with permission pending) parts of peoples blogs to collaborative everything together.

Then me being will perform controlled studies of 1 mod vs stock.

It would be very handy to call on the experienced people to check on this thread from time to time for me. KKDDMM, Daryoon and MassiveOverKill, may I please give you credit and use some of your content. All credit will clearly be given and a link to your original posts provided at the bottom of anything containing your content.

Want a controlled thread with no nonsense discussing the technical impacts of the given mods to flight characteristics.

Stay tuned guys. This is going to be a good one. I personally cant wait to start hacking PCB and TX to build the ability to program curves into the yaw taking the resistor mod to another level. That will be my godly mod to contribute ;)

#2 flightsfancy Dec 31, 2012 07:28 AM

Subscribed

#3 MassiveOverkill Dec 31, 2012 11:17 AM

Diablos, I think a better way to do this is make your own blog. I haven't responded to your other posts simply because I've been swamped with our new business and that I haven't touched my V911 in nearly half a year, and that there are enough V911 veterans around that I'm sure they can answer your questions (and have probably surpassed me on current events with the V911).

My v911 is literally collecting dust. I haven't even finished my Benma paddled flybar vs my prototype blog test I've been so busy but I already know that my prototype is better (as Stonecutter can attest to).

Feel free to quote any of my material, just be sure to give credit to original authors that I may have quoted.

#4 LarryCnAZ Dec 31, 2012 01:48 PM

I'm in, can't wait to see all of the mods in one place.

Thx.

#5 Diablos Dec 31, 2012 09:38 PM

Ive been reported left right and centre. Someone is spamming the report button on all my posts, ive spent hours typing posts and theyre being removed or hidden, i dont have time to double post everything. Sorry guys ill be browsing as a free user now. Doing all my mods that havent been done yet.

So sorry guys ill just be leeching from now on.


Im and honest man and ill admit i made 2 posts that could be considered racially offenseive to aboriginal australians. But as im aboriginal and australian i figured what is acceptable in AUSTRALIA should be acceptable on the internet. I was wrong and i apologize if ive offended.

Im sorry i wont be finishing what ive started. We all know it was going to be good and had our best Modder's excited.

I enjoyed my time here and peace :)

#6 flightsfancy Dec 31, 2012 09:42 PM

Quote:

Originally Posted by Diablos (Post 23674979)
Ive been reported left right and centre. Someone is spamming the report button on all my posts, ive spent hours typing posts and theyre being removed or hidden, i dont have time to double post everything. Sorry guys ill be browsing as a free user now. Doing all my mods that havent been done yet.

So sorry guys ill just be leeching from now on.

I enjoyed my time here and peace :)

I hear ya. Unfortunately I'm in the same spot. I'll just be in absorb mode from here on out. I was more than looking forward to your contributions.

#7 Jasen40 Dec 31, 2012 10:58 PM

Quote:

Originally Posted by flightsfancy (Post 23675003)
I hear ya. Unfortunately I'm in the same spot. I'll just be in absorb mode from here on out. I was more than looking forward to your contributions.

I was reported to for my reply of nice post to you.It was considered trolling.

#8 flightsfancy Dec 31, 2012 11:01 PM

Quote:

Originally Posted by Jasen40 (Post 23675488)
I was reported to for my reply of nice post to you.It was considered trolling.

The mods either need retraining or to be given a new rule interpretation guide.


All times are GMT -5. The time now is 10:41 PM.