For Sale at AEF.
OK, so I am into cleaning the Garage this last couple of months, What are you bringing for sale? I have a lot of EDF jets, I would like to unload, most are foam, I will post some pics later, but I wanted to get the thread started.
im gonna try and sell a balsa su-31 with everything but a motor. It flew great i just have to sell somethings to get my bigger rc plane going again.
input this URL:
( http://www.buy2me.net/ )
you can find many cheap and high stuff
Believe you will love it.
WE ACCEPT CREDIT CARD /WESTERN UNION PAYMENT
YOU MUST NOT MISS IT!!!
Report the above.
Well here goes!
Extreme Flight extra 300 88". Hyperion 5045,CC160 esc,8611ail, spectrum on rud,ele.
Hemple Yak55 50cc. A60-18L mad dog mount CC110esc 8611rud/ail 8411ele.
Hyperion Helios 63" f3a Turnigy power,esc align servos
Fliton inspire 90. e-flight 110 cc85hv&bec 8231servos
Nib-Sebart wind 110s red version Have recomended a-50 16l nib
Nib hanger 9 sopwith camel 60 Have new storm motor if needed
3dhs 57"extra330 Damaged Good wings, tail section,landing gear ect. could be fixed
All planes will fly at event unless spoken for prior. Will not ship,LPU!!!
Telephoto lenses for Canon Digital cameras
I have a couple of good telephoto lenses for sale with Canon mounts for current Canon digital SLR cameras. Sigma telephoto was about $200.00 new on sale for $100.00. It is in excellent condition. I also have a Canon telephoto lens that I will post about tonight. I will bring to event only if there is interest. I will also have a couple of helicopters for sale. Mike H
No room in Prius to bring big stuff to sell.
Come talk to me about your lenses. I currently have just the standard 55mm, and then a 70-300mm zoom (an old Tamron that still works OK) for my new Canon. If you have something better, let me know and maybe we can work something out. ;)
Super Sniper XL
Thinking about selling a un-flown Super Sniper XL. This has so many up grades I have lost count :o It's currently set up as a 12s system, HET 9305 V2 Fan, HET Typhoon 700-68 1200 KV motor, and a HET HV 100 AMP ESC. Has the V2 stab with 2 servos, Tam Jets electric retracts/struts. All servos are hyperion, separate Hyperion LifePO4 2100 mAh 6.6 RX pack. It has been reinforced everywhere, there will be no structural issues with this one!
Thanks for looking, let me know if there is any interest?
Alfa Models For Sale
I have a couple of Alfa planes that I am selling.
This plane is receiver ready with a Hacker 20 amp esc, 2 Hitec HS-5055MG servos, and 3 Turnigy 1300 3S 15C batteries. The plane flies and looks great. It only has 10-15 flights on it.
A4 Skyhawk $90
This plane is still in the box. I am selling it with the motor.
Please PM me or email me at firstname.lastname@example.org if your interested. I will be at the electric fest on Saturday. If you live in the Chandler area I can arrange pick prior to the event.
After much soul searching I have decided I am not now and never will be a 3D helicopter pilot. I am a competent FP and scale helicopter pilot. I will be bringing some helicopters to sell to better fit my new approach to helicopters. I have a good size quad copter with lights for sale. Two new in box kits a plane and an electric sailplane, a high speed boat, five receiver ready planes at good prices in like new condition. A micro P-51, and two RC toys. I will bring the two camera lens and Pat has first choice for both and they can be tried out at the event if you have a Canon digital SLR camera. There may be more but we will see what fits in the van. Mike Heer
I'll have a 3D-Hobbyshop 57" Sukhoi SU-26 in the Red Bull scheme for sale at the festival, has Hitec 225MG servos on all surfaces, Castle Phoenix 80 ESC, Torque 4014 motor, could probably throw in a Spektrum AR6200, or AR7000. I'm not really sure what these things go for these days, make an offer. PM me of you'd like some pictures.
Super Sniper 90 XL V2
Up for sale is a brand new un-flown Super Sniper 90 XL V2, this has the upgraded dual servo elevator. All parts were bought new for this build, totally ready to fly with your RX. This jet was built by Electric Jet Factory, so you know it was done right! Below is a list of what’s installed, I am funding another project so this one must go. It will be at Arizona Electric Fest on Friday & Saturday.
Super Sniper Kit = $399.99
8 - Hyperion DS16-FMD Digital Servos $36.99 X 8 = $295.92
2 - Turnigy Nano-Tech A-Spec 5s 4500mAh 65c Batt. $ 219.98
Hyperion G3 LifePO4 RX Battery 6.6 Volt 2100mAh = $25.99
Tam Jets Electric Retracts with Trailing Struts = $299.99
HET 9305V2 90mm Fan = $49.99
HET Typhoon 700-68-1200KV Motor = 119.99
HET 120A-Pro-12S Brushless Speed Controller = $129.99
Total Parts Only NO Labor = $1541.84 :eek:
Up for sale is a VIP Racer from Soaring USA. It is ready to fly with the items below, all you would need is your receiver. I just bought it and decided to go in a differant direction, below is the link with the specifications from Soaring USA. This will be at AEF on Friday & Saturday for anyone intrested. I will accept PayPal without any fees!
VIP Racer - $205.00
Mega 16-15-3 Motor - $89.99
Castle Creations Phoenix 45A ESC - $69.99
2 - JR DS285 Digital Servos - $39.99 ea.
TruTurn Spinner - $29.99
10 - APC Carbon 4.75x4.75 Props - $2.99 ea.
2 Hyperion 2100 mAh 25c Batt. - $32.99 ea
Total Build Cost = $571.99
My Price $200.00 Firm SOLD!!!!!!!!
Photos and original listing start at post #1343
I have 11 Castle Creation HV160 Phoenix Ice2 received 2/24/12. As per protocol during prototype testing, labels have been removed from most. Very little time on units and never driven hard. $160 ea.
1- Field link for flying $15
1- Castle Link USB programmer with USB cable $15
1- Castle Link USB programmer / NO USB cable $10
1- Castle Creation radio strap- buy some stuff and its yours
Accu-Cycle Elite- $40
2-Turnigy C8085-170kv motor, new in box $70ea
specs- 6000watt, 12s
21-Turnigy balancer & Charger 2S-3S $1ea
2- New Turnigy 130A Watt and Power analyzer $15ea
72' (22m) Turnigy 8awg black silicon wire
33' (10m) Turnigy 8awg black silicon wire
108' twisted 3 conductor wire
19 bags, each bag contains 10 pair of 8awg connectors
22 bags, each bag contains 10 pair of servo connectors
10- 26x6E custom ordered direct from factory
10- 26x6E pusher custom ordered direct from factory
other misc props
2- C8085-170kv motors with shortened shaft
29- Zippy Flightmax 5800 3s 30c. Low cycle, solid, balance well- $20ea
4- Zippy Flightmax 5000 3s 40c. Solid, balance well- $15ea----SOLD Held until 9:00am Sat 26th
5- Turnigy 5000 3s 40c. Solid, balance well- $15ea
6- Zippy Flightmax 2200 3s 20c. Low cycle, solid, balance well- $3ea
29- Misc damaged 3s lipos. Mostly 5800s, a few 5000s. Some from HobbyKing with bad cell, others lost cell early. Some were intentionally driven to fail. There are definitely good cells if you like fishing...$???
18- 1500 7.2v Tower Hobbies Ultra Sport NiCds. No idea the state of these. ????
8- C8085 170kv 6000w 12s motors with short shafts. Props mount directly to motor with 4 bolts.
1-Turnigy Monster 2000 200A ESC and programming card
1-HobbyKing 100A ESC
2- Exceed RC Momentum Series 150A opto ESC
1- Prop / Rotor balancer
2- Turnigy Aerodrive sk5055-580 motors-----SOLD, held until 9:00am Sat 26th,
Photos start at post #1343
|All times are GMT -5. The time now is 04:54 AM.|