RC Groups

RC Groups
    R/C Blogs
        Gallery I've got both of them !!!V912 & V922 !!!

#1 KKDDMM Dec 09, 2012 04:52 AM

I've got both of them !!!V912 & V922 !!!
 
6 Attachment(s)
I will report them,after back home.
-------------------------------------------
I'm back home,so let's start the review.

1)The TX of V912 is very good for normal V911 as 9X.
2)The RX of V922 is different from the "sample"

I tried flying normal V911 with TX of V912.
The TX of V912 is better than the TX of V911.
The best choice is 9X.
But for normal V911,TX of V912 is enough to play,I think.
But if you make a mod(ex. barless or other),you should choice 9X.


and...
I checked V922.
I found the version number is changed.
The RX of shop-sample's version is V1.3.
My V922's version is V1.4.
So now I don't know,V922 is the same thing as FBL100 or not...

I'll check my V922 can bind to FBL100's TX? or not?

I think,this V922 is a second CP-heli for beginner.
Can not change pitch-curve,so very difficult for beginner,I think.

see next page,more photos

#2 KKDDMM Dec 09, 2012 09:18 AM

can not change pitch-curve
 
8 Attachment(s)
I can not recommend this RTF of V922 to CP-heli-beginner.

reason is
1)can not change pitch-curve.
2)original pitch-curve of normal mode is very difficult for beginner.
3)also can not change exponential-curve.

and...
I don't know HT8 can use for this heli, I will check!

#3 FyreSG Dec 09, 2012 09:42 AM

Why is the default throttle and pitch curve not suitable for beginners? Is it too sensitive or too insensitive? In other words, how do you wish to change it?

#4 KKDDMM Dec 09, 2012 04:16 PM

Too sensitive
 
Quote:

Originally Posted by FyreSG (Post 23481713)
Why is the default throttle and pitch curve not suitable for beginners? Is it too sensitive or too insensitive? In other words, how do you wish to change it?

I think it is too sensitive for CP-beginner.
It is start at zero-pitch.
Too difficult for beginner,too sensitive up-down.

#5 Jasen40 Dec 09, 2012 11:01 PM

Thanks again KKDDMM, for all the information and tips you always provide.

#6 KKDDMM Dec 11, 2012 05:18 AM

I understood the left shoulder sw!
 
I understood the left shoulder sw!

If you choice "L" mode.
left-shoulder-sw OFF:normal mode
l-s-sw ON:inverted mode(elev and rud and pitch be inverted)

If you choice "H" mode.
l-s-sw OFF:normal mode
l-s-sw ON:normal stunt mode

L/H mode is changing "inverted or normal"

So if you are usual 3D flier,you must choice "H" mode.
Then you can do usual 3D flight.

#7 KKDDMM Dec 11, 2012 06:08 AM

And I checked the linear-servo's stroke,"H" and "L" is same stroke......
So this TX is not suitable for beginners,is suitable for intermediate flier,I think.

#8 KKDDMM Dec 14, 2012 11:19 PM

Please stop joking...
 
1 Attachment(s)
Full colored touch screen LCD?
Please stop joking!

It is not touch screen,and not full color.

#9 KKDDMM Dec 15, 2012 02:43 AM

I checked the TX of FBL100,full compatible !!!
 
I want to buy FBL100,but could not find RTF with apper-class TX.
There was only RTF with low-class TX,so I did not buy.
I asked shopkeeper to check binding FBL100 TX and V922.
And I succeeded binding,they are full compatble!

But I can not get the upper-class TX...

#10 FyreSG Dec 15, 2012 02:46 AM

Do you mean HiSKY X-6S transmitter? It has a LCD screen and that looks upper class to me. :)

How about trying the 9X transmitter with HT8 adapter to control V922?

#11 ercapoccia Dec 15, 2012 06:51 AM

Quote:

Originally Posted by KKDDMM (Post 23532118)
I want to buy FBL100,but could not find RTF with apper-class TX.
There was only RTF with low-class TX,so I did not buy.
I asked shopkeeper to check binding FBL100 TX and V922.
And I succeeded binding,they are full compatble!

But I can not get the upper-class TX...

BG has it in stock http://www.banggood.com/Wholesale-Hi...r-p-48795.html

#12 jaas75 Dec 15, 2012 01:08 PM

Guys!! a good idea is to find out if the "toy transmitter" v922 comes have a buddybox connection.
Cuz we can just hook them up with our current "professional" Txs and adjust rates,expos,etc

#13 KKDDMM Dec 24, 2012 10:43 AM

I've got FBL100 with X-6S today!
 
V922 can fly with X-6S,and FBL100 can fly with V922's TX.
X-6S has 6 helis memory,and can change every curves,but LCD is too small.

And X-6S can bind 2 helis at once,so I will connect V922 and FBL100 someday.

#14 jack herr Dec 30, 2012 11:25 AM

bought v922
 
I am moving up from the V911, xieda 9958 to the cp minis. I was just about to purchase an mcpx 2when I saw the V922. I love the 911s so much I have 3 and 2 9958s. I am now reading that the tx is not rteally so good for beginers to learn cp flight. Can this heli be bound to a 6ch tx that is programable, and has anyone come up with throttle curves and the other sutff one needs to have better luck learinig. Had I bought the mcpx I would have bought a tx and flight sim to learn on anyway. Would that still be a good idea with the 922? I fly the fp minis quit well so i know I will pick up the cp quickly, but if a sim and 6ch will spped that learning curve up I would still go that route. Thanks for the help know will be forthcoming. I love these forums

#15 ercapoccia Dec 30, 2012 05:11 PM

V922 is a rebranded HiSky FBL100 that came with a programmable TX

http://img.banggood.com/images/uploa...038853-005.jpg


You could also buy the external module HT8 that should be compatible with many TX.


All times are GMT -5. The time now is 02:09 PM.