RC Groups

RC Groups
    Hitec/Multiplex USA
        Discussion voltage for a hitec Optima 7

#1 siwind Dec 08, 2012 05:25 PM

voltage for a hitec Optima 7
 
What is the maximum voltage for a hitec Optima 7 - 7 Channel 2.4 GHz AFHSS Receiver

#2 A.T. Dec 08, 2012 08:11 PM

1 Attachment(s)
Quote:

Originally Posted by siwind (Post 23477109)
What is the maximum voltage for a hitec Optima 7 - 7 Channel 2.4 GHz AFHSS Receiver

7.4v into the Servo Bus and 35v into the Supplementary Power Port (SPC).
. Optima Transceiver & Minima Receiver - Voltage Input Limits.
Extract
"Optima accept 2S but extremely few servos are capable of running on a 2S lipo.
"Optima voltage requirements are 4.8-7.4v being the nominal value of a 2S Lipo.
A fully charged 2S Lipo being maximum input voltage to the Servo Bus.
"
Recommend limit servo side to 5.0v/Max 6.0V with switchmode regulator rather than typical
BEC or unregulated Ubec, especially for EP models.
Aurora A9 & Optima RX - Battery - 2S Lipo Voltage Capabilities."

ex Hitec USA Support Forum Sticky:
Aurora 9, AFHSS Spectra Modules, Optima Transceivers, Minima Receivers
& Telemetry
- FAQ & Undocumented Features
- Mixes, Setups, Tips. {Individual Links often updated}


Alan T.
Alan's Hobby, Model & RC FAQ Web Links

[Right click RCG attachments and select "open in new window".
Button bottom right of IE screen (or _+icons Firefox Toolbar) enables viewing size increase upto 400% for easier reading.]


All times are GMT -5. The time now is 07:47 AM.