RC Groups

RC Groups
    HobbyPartz.com
        Discussion Exceed RC Helium Brushless Motor - Mounting Screws?

#1 InTr4nceWeTrust Dec 04, 2012 07:40 PM

Exceed RC Helium Brushless Motor - Mounting Screws?
 
I ordered an Exceed brushless heli motor and it didn't come with any mounting screws. Was it not supposed to? This is the motor:
http://www.hobbypartz.com/86ma81-2210-3800kv.html

#2 RaidenCharlie Dec 05, 2012 11:40 AM

The motor is suppose to come has pictured on the website. You are suppose to use the screws that came in your helicopter kit.

http://ep.yimg.com/ca/I/yhst-6219634..._2237_87041129

-Charlie

#3 InTr4nceWeTrust Dec 06, 2012 04:46 PM

Would you be able to tell me what screw size is needed? I don't have a screw in my kit that fits the motor.

#4 RaidenCharlie Dec 07, 2012 11:37 AM

Ok let me double check and I'll get back to you.

-Charlie

#5 RaidenCharlie Dec 07, 2012 01:19 PM

The bolt is a M3 bolt, if you go to a hobby shop and tell them you need the bolts for a motor they will be able to get the correct one for you.

-Charles

#6 InTr4nceWeTrust Dec 07, 2012 07:58 PM

M3 screws are common computer screws and are too large. After further investigation, M2 screws are too small. It seems M2.5x5mm screws would be ideal. I will attempt to locate these at a hobby shop I guess.


All times are GMT -5. The time now is 06:34 PM.