RC Groups

RC Groups
    Electric Ducted Fan Jet Talk
        Discussion Heavy metal (not really ) Phantom

#1 pencon Dec 01, 2012 02:48 PM

Heavy metal (not really ) Phantom
 
3 Attachment(s)
Ok folks , since my phantom is partially covered in pop cans ,I thought it could perhaps achieve non foamy status . The pop can sheets once the end caps were removed came out to .16 of an ounce each . I used about 6 pop cans so with 3m adhesive not more than a couple ounces I would think .This all started after a crash and I covered it to hide the nasty crash damage . This thing is going back up with a BL32 Changesun 10 blade and 6S . :) I'm pondering changing the tail to an all moving tailplane and covering it as well . I'm a bit of a rivet addict .

#2 pencon Dec 01, 2012 02:57 PM

1 Attachment(s)
Here's a sheet of popcan AL on the gram scale . 4.6 grams or .16 of an oz . Comments are welcome by the way ..

#3 Double E Dec 01, 2012 06:42 PM

Why not just use aluminum ducting tape or flight metal?

#4 pencon Dec 01, 2012 07:48 PM

1 Attachment(s)
I've got tape on parts of it . The aluminum hides the damaged cracked areas , which looked awful , without even sanding them . The tape would have shown all the cracks.I find all the dings on a foamy get transfered right through the tape so it would end up looking rough pretty quick as well . The can aluminum hides all the foam beading or flaws completely . Plus the aluminum sheeting looks way better than the tape up close. This is actually practise for another plane .

#5 eazyp2 Dec 01, 2012 08:52 PM

Looks Cool to me ,good luck

#6 jofro Dec 02, 2012 12:10 AM

Talking about heavy metal, there's deffinitelly no one to match Black Sabbath with Dio orTony Martin. Have a good listen, sounds just about as good as my metal/foam combo I'm working on, Joe.

#7 pencon Dec 02, 2012 01:00 AM

deleted

#8 jofro Dec 02, 2012 01:31 AM

1 Attachment(s)
Quote:

Originally Posted by pencon (Post 23417755)
Got pics?

You got to be MAD! J.

#9 pencon Dec 02, 2012 01:53 AM

Dude , I like the turbine but please put on a shirt .

#10 jofro Dec 02, 2012 03:39 PM

Quote:

Originally Posted by pencon (Post 23417906)
Dude , I like the turbine but please put on a shirt .

Mate, you have seen nothing yet! You shoud see the maestro flying jets in budgee smugglers! Ciao, J.

#11 pencon Dec 02, 2012 04:46 PM

That's ok I'll pass .. one skin pic is enough

#12 stoneenforcer Dec 03, 2012 10:09 AM

now can the fuse to match

#13 jofro Dec 03, 2012 02:54 PM

2 Attachment(s)
While at heavy metal subject, this foamy is covered with 24kt gold, J.

#14 pencon Dec 03, 2012 05:58 PM

Might do Stoneenforcer, first I want to see if it flys ok after the current repairs before spending more time on it .Perhaps I'll start at the front and work my way back .

#15 metalbenderusn Dec 04, 2012 11:50 AM

Could have used liquid sheeting, easier (maybe):eek:

http://www.wowplanes.com/product_inf...roducts_id=130


All times are GMT -5. The time now is 01:17 AM.