RC Groups

RC Groups
    Micro and Sub-Micro Boats
        Discussion miss canada III RC conversion

#1 miss_canada_III Nov 16, 2012 11:56 AM

miss canada III RC conversion
 
Hello,
I'm finishing a conversion kit of little miss canada III in RC with all internal materials from a little magic cat.
If anybody is interesting I can send pictures and methods...:)

#2 coriolan Nov 19, 2012 01:40 PM

Is it the kit from Osbornmodels?
http://www.osbornmodelkits.com/RC_model_boat_kits.htm
A friend of mine built the larger one(1/12 scale) a few years ago and it was a good runner. The smaller 1/24 kit would be more tricky due to size:
[Miss Canada III
A 1/24 scale static display model of the sleek stepped hydro.
Length 12.25
Beam 3.5 ]

#3 miss_canada_III Feb 21, 2013 08:18 AM

hello,
sorry for my responding time. I was quite busy.
Yes, it's the little one.
I just putted in it all the materials from the little magic cat, but still have some work (I lose the signal after 5/8meters)

#4 Shedonist Apr 06, 2013 04:00 AM

I would be very interested in any information that you could give me about your conversion, have been considering this for years...

#5 szymanski Apr 12, 2013 06:41 PM

help with miss canada III
 
hi all, if anyone has built the osborn miss canada II kit can you advise on electrics set up...im almost finished building the boat but dont know the best way to set it up with all the running hardware!

any help appreciated

cheers

jon

#6 coriolan Apr 12, 2013 07:39 PM

Osborne models has running hardware for the 1/12 scale "Miss Canada III", the 1/24 size model is intended as display so your best bet would be to use the drive from a similar sized existing boat(finding an usable prop would be the biggest challenge).


All times are GMT -5. The time now is 12:13 PM.