Motor / Prop saver
Based on the capri-sun straw idea (MassiveOverkill) I'll post some photo's and dimensions of my prop/motor saver idea made out of a ballpoint...
I found some (old) ballpoints and thought that the thickness of the inner tube (pen) maybe the same as the nickel/copper top. This top of the motor is about 2mm and the tube of the ballpoint is about the same. I've cut the ballpoint it into 4 pieces of 2.8 mm tube and pushed them over the top of the motor. When I hit something with the prop it comes off and when I crash and a prop hits the ground the tube will preserve the brush(?) in the motor
|All times are GMT -5. The time now is 12:53 PM.|