RC Groups

RC Groups
    R/C Blogs
        Discussion ORX 3AS 3-axis controller to be tested!!!

#1 SkyCadet Oct 25, 2012 01:42 PM

ORX 3AS 3-axis controller to be tested!!!
2 Attachment(s)
Hi gang!

Well, HobbyKing has offered this little unit for the very affordable price of $14.99/ea.

The unit looks well made; however, I feel that the 15g weight may be an issue for smaller planes below 20oz. (15g is 1/2oz. afterall!). The board itself is only 5.5g or so. I plan to remove my case and coat the board with either heat shrink, or mount it on a small thin piece of 1/32" ply to make it more secure.

9.5g of dead weight is not what I want for my test plane, the Super Decathlon BL. It flies now VERY smooth and balanced well. This board will mount near the CG currently setup, and will be running with the aileron and elevator channels, and I'll tweak the gains until I feel that they are enough to be flight-worthy. Picture of the unit below. I hope that this unit, once configured and set properly, will allow for better wind handling and more adverse air current stability. Stay tuned!


All times are GMT -5. The time now is 05:20 AM.