RC Groups

RC Groups
    Aircraft - General - Miscellaneous (FS/W)
        Sold 2.4GHZ 100mW Tx/Rx WITH 1/3-inch SONY CCD Camera NTSC

#1 momofx Oct 15, 2012 03:12 AM

2.4GHZ 100mW Tx/Rx WITH 1/3-inch SONY CCD Camera NTSC
I originally bought this setup a few weeks ago for FPV video and aerial photographs with a Quadcopter. Unfortunately my Quad project never got off the ground so I am selling this setup complete with the camera mounting assembly that I bought seperately as well. These items are BRAND NEW sealed in their package. Due to the nature of this hobby, they are sold as is - no returns or refunds.

Comes with everything as pictured but please note that the Camera Mount does not come with the Servos as pictured (This is how it is sold). I have included that picture to show how it is assembled and works with the servos.


Fast shipping via USPS Priority Mail with tracking number. I ship within 24 hours! A smoke free home. No returns or refunds - sold as is due to nature of hobby. Thank You!

Features and Specifications

12 Channel Tx/Rx video system with CCD camera.
The camera uses a quality glass lensed SONY CCD camera system.

Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage.
If you buy your camera and Tx seperately the plug polarity and voltages may be very different.

1 x SONY CCD 1/3inch Camera
1 x 2.4GHz 4 channel Video Transmitter (100mW)

1 x 2.4GHz 12 channel Video Receiver


Camera spec.

CCD sensor type:1/3 color SONY CCD
NTSC: 510(H)*492(V) (Included)
PAL: 500(H)*582(V)
Scanning system: Interlaced scanning
Synchronization: System:Inter
Horizontal resolution: 520TV line
Minimum Illumination 0.01LUX/F1.2
S/N Ratio: 48dB
Gamma Modification: 0.45
White balance: Auto
Auto backlight compensation: Auto
Lens: 3.6MM
Audio: No
Input voltage: 9~12.6V
Electric current 80MA
Electronic Shutter: 1/50 (60) ~ 1/100,000s
Video output: 1.0VP-P composite video
Operation Temp.: -20~50
Size: 38*38mm
Flight time: Approx 60min/100mah 3S

FPV Tx Spec.
Channel: 4-Ch, AV synchronization
Power: 100mW
Input voltage: 8~12V
Weight: 29.9g

Size: 41x28x16mm
Frequency: 2.4G 2.410G/2.430G/2.450G/2.470G

Camera Mount

Light weight and easy to install.
Kit includes bearings, screws, ball/socket, threaded rod and pre-cut fiberglass board.


Dimensions: 36x28mm
Camera Mount plate size: 28x26mm

Weight: 8g

Servo type required: 5~10g




#2 momofx Oct 21, 2012 10:21 AM

New lower price $68 SHIPPED CONUS! :)

#3 gjhinshaw Oct 28, 2012 08:48 PM

I will take it for 65 shipped

#4 momofx Oct 29, 2012 04:00 AM

Pm'd ^

#5 gjhinshaw Oct 29, 2012 01:32 PM

Sent!! THANKS!!

#6 momofx Oct 29, 2012 01:33 PM

Sold to gjhinshaw. Thank you!

All times are GMT -5. The time now is 11:01 PM.