RC Groups

RC Groups
    RC Airliners (Commercial, Cargo, Troop Carrier)
        Build Log ERJ-145 Mini-Liner!

#1 demondriver Oct 11, 2012 07:38 PM

ERJ-145 Mini-Liner!
 
6 Attachment(s)
Hi DemonDriver here & I'm embarking on my newest Mini-liner based on the 4" inch cardboard shipping tube . . . .The ERJ-145 or should I say the DD-145, The Brasilia and 145 share almost the same Nose, tail section and fuselage cross section, the "T"tail is VERY close but the Stailizer is 15-20% longer and the tail Boom is Bigger on the 145's tail.

I hope to have my 145 Prototypes ready in 1-2 weeks.

Specs:

Length 46.08 Inches
Wingspan 36.50 Inches
Flying weight 2-2.20 pounds

Powerplan 2 45-50mm edfs
Battery 1 11volt 30-70c 1300Mah Lipo
2 25-30 Amp Esc's
5-7 mincro 5oz servos

I will be doing these In BA and Luxair Liveries.

Any suggestions or advice or 145 stuff is welcome!:D

#2 demondriver Oct 11, 2012 07:44 PM

Fuselage . . .
 
3 Attachment(s)
Here is the 145's Cardboard Fuse, I used a plastic joiner to join the sections together.


Here is the Link to where I buy these tubes.

http://www.staples.com/office/suppli...dList=listView

#3 demondriver Oct 11, 2012 07:46 PM

Powerplant .. . . 50mm
 
1 Attachment(s)
Here is what will power my New 145's these 50mm EDF's from HobbyKing.

#4 demondriver Oct 11, 2012 07:48 PM

Model
 
1 Attachment(s)
Because I have the Nose & tail ready for my New 145, a model really isn't necessary but It can come in handy for the engine nacels

#5 Boeing_to_EMD Oct 11, 2012 07:49 PM

Lookin' good DD!

#6 demondriver Oct 11, 2012 07:49 PM

Quote:

Originally Posted by Boeing_to_EMD (Post 22976968)
Lookin' good DD!

Thanks Boss!:D

#7 demondriver Oct 11, 2012 07:51 PM

1 Attachment(s)
Here is the Nose & tail ready to rock! . . .. . .I'm simply gonna use the Brasilia's:D

#8 WAGliderGuy Oct 11, 2012 08:10 PM

Subscribed! :popcorn:

Ethan

#9 demondriver Oct 11, 2012 08:25 PM

Quote:

Originally Posted by WAGliderGuy (Post 22977147)
Subscribed! :popcorn:

Ethan

I'm honored to have the DC-6 master on board.:D

#10 jdlilfan Oct 12, 2012 06:11 AM

subbed

#11 abroadhurst94 Oct 12, 2012 07:34 AM

DD, have you tested the setup yet? If so, how've you found the performance of the EDF's to be? I've read mixed reviews for them and am curious.

Alex.

#12 demondriver Oct 12, 2012 09:05 AM

Quote:

Originally Posted by jdlilfan (Post 22980105)
subbed

Its good to have a 145 pilot on board!:D

#13 demondriver Oct 12, 2012 09:07 AM

Quote:

Originally Posted by abroadhurst94 (Post 22980495)
DD, have you tested the setup yet? If so, how've you found the performance of the EDF's to be? I've read mixed reviews for them and am curious.

Alex.

No Alex I havnt run those edf's up yet. .. .. I'm thinking a good 40-50C 11 volt lipo should do the trick.

#14 Doushiyou12 Oct 12, 2012 10:45 AM

Talk about a quick build
Subbed!!!
:cool:

#15 demondriver Oct 12, 2012 10:51 AM

Quote:

Originally Posted by Doushiyou12 (Post 22981841)
Talk about a quick build
Subbed!!!
:cool:

Yes indeed Boss . . .short & sweet!:D


All times are GMT -5. The time now is 07:59 PM.