RC Groups

RC Groups
    Hot Online Deals
        Cool Only USD80.9 HOBBYWING EZRUN 13T 3000KV RC Model Brushless Motor & WP60 60A ESC Combo

#1 szewang2805 Oct 08, 2012 09:54 PM

Only USD80.9 HOBBYWING EZRUN 13T 3000KV RC Model Brushless Motor & WP60 60A ESC Combo
 
http://www.hobbyhot.com/images/hobby...c_me158_01.jpg

Motor Specifications
Rotational Speed: 3000 KV
Motor Dimensions (Diameter x Length): 36mm x 50mm
Shaft Dimensions (Diameter x Length): 3.17mm x 15mm
Input Battery Types: NiCd/ Nimh/ Li-po Battery
Recommend Model: RC Model Car


ESC Specifications
Model: EZRUN-WP-60A
Dimension: 46mm(L) x 34mm(W) x 35mm(H)
Cont. / Burst Current: 60A / 390A
Resistance: 0.0007 ohm
Suitable Car: 1/10 Scale On-road / Off-road
Motor Type: Sensorless Brushless

Suitable Motor:
2S Lipo 6 cells NiMH
On-road: =>5.5T, Off-road =>9T, 3650 size motor
3S Lipo 9 cells NiMH
On-road: =>8.5T, Off-road: =>13T, 3650 size motor

Battery: 4-9 Cells NiMH or 2-3S Lipo
BEC: 6V/2A (Linear mode built-in BEC)
Weight (with all wires): 75g

ESC Features
Water-proof and dust-proof. The ESC can work under water for a short time.
(Please remove the cooling fan when running car in water, and after running .please make the ESC clean and then dry it to avoid the oxidation to copper connectors)

Specially designed for RC car and truck, with excellent start-up, acceleration and linearity features.

Compatible with sensorless brushless motor.

3 running modes suitable for different applications (“Forward with brake mode”, “Forward/Backward with brake” mode and “Rock crawler” mode).

4 steps of maximum reverse force adjustment.

Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.

9 start modes (“punch”) from “soft” to “Very aggressive” to be suitable for different chassis, tires and tracks.

Multiple protection features: Low voltage cut-off protection for Lipo or NiMH battery / Over-hest protection / Throttle signal loss protection / motor blocked protection.

8 steps of timing adjustment.

Several programming methods are supported such as: the “SET” button on the ESC, the LED Program Card, the advanced LCD Program Box , and the PC Software.

The firmware of esc can be online updated through and USB adapter on the advanced LCD Program Box.


Program Card Introduction
Thank you for interesting the program card for the brushless ESC (Electronic Speed Controller). The program card has a friendly user interface, so you can easily set programmable parameters of the ESC with this device. It is pocket- sized, so you can bring it to the racing field conveniently.

Program Card Specifications
Dimensions: 88mm x 58mm x 14mm
Net Weight: 40g

http://www.hobbyhot.com/HOBBYWING-EZ...mbo-ME158.html


All times are GMT -5. The time now is 03:35 AM.