1/6 Scale Piper L-4 Maxford Usa LPU
I'm moving in a coupla weeks and want to sell my Maxfors USA Piper Cub L-4 done in the New Mexico National Guard scheme that is still flying today. I only have about five flights on it and it is a decent flyer. Just lumbers around Cub style, needs a little rudder input for scale like turns. Its my first Cub and while I've heard they are sqiurrelly on the ground this one is easy to tak-off. Just throttle up little at a time and about 1/2-1/3 throttle is lifts off straight as an arrow. I can't remember exact specs but roughly
weighs about 5 lbs
5x Turnigy standard servos
2400 mah Nimh rx batt
on/off switch w/ charging jack
OS 46LA w/ pitts style muffer
World Models easy fuel fitting
I'll sell it RTF minus rx, airframe only, however.....minus engine it u want to put ur own on it. Just let me know.
Let's start at $250 RTF minus rx
Local Pick Up in the Destin Fl 32541 area......will meet within reasonble distance but keep in mind my truck only gets 10mpg
Thanks for looking
Like the scheme. I did a Midwest AT-6 in NM NG scheme several years ago.
how much with out mtr thanks
i was thinking $250 might be a little high. how about $175 for airframe, servos, batt and switch? sound fair?
|All times are GMT -5. The time now is 02:43 PM.|