RC Groups

RC Groups
    Mini Helis
        Discussion Zys-s , 3GY or HobbyMate FBL

#1 Torch8 Oct 04, 2012 12:27 PM

Zys-s , 3GY or HobbyMate FBL
I got a Gaui 200 and plans to go with Ino-lab HGD 202HB for cyclic and HGD 201HB for tail servo. Which ones of these latest 3-axis is reliable and plus if it can work with my HK Orange Specktrum Satellite RX? Had and sold my Beastx V2 (running v3 software) to rebuild my Gaui 200. So I am familar with Beastx steps.

No 3D flying, really just for circuits and sports.

Debating on Tarox Zyx-S, Alzrc 3Gy or HobbyMate

#2 everydayflyer Oct 05, 2012 12:20 PM

HobbyMate is same as BeastX V1 so you should be experienced with it.

I have Tarot ZYX-S and also Copter X CX-3X 1000 and they both work fine for me. I use and like the computer interface software for programing and tweaking them .



#3 Torch8 Oct 05, 2012 01:32 PM

Think I'm going with Tarot Zyx, as I need to keep cost down. Hope I don't have to do much tweaking. Othewise will wait for Hobbymate to come out with clone of Beastx v2.

#4 everydayflyer Oct 06, 2012 06:09 AM

Tarot around $40 and Hobbymate around $60 to $70. I guess I fail to understand the cost issue. IMO $30 difference for a gyro / FBL unit is chump change , if one were talk cycluic servos and one was $4 ea. and the other was $30 then that is a $78 difference.


I found one E bay listing for $53.


All times are GMT -5. The time now is 09:24 PM.