RC Groups

RC Groups
    Cars - Trucks and Parts (FS/W)
        Sold Redcat Racing 1/6th Shredder XB - w/LiPo's & Charger - GT3B Transmitter

#1 JHawk19 Oct 02, 2012 12:13 PM

Redcat Racing 1/6th Shredder XB - w/LiPo's & Charger - GT3B Transmitter
6 Attachment(s)
You are getting an awesome package here!!

Listed under car and truck b/c the same platform is used for the Shredder SC and XT, just swap out the bodies and mounts.

The Redcat Racing 1/6th scale Shredder XB, Ready to Run with a New Fly Sky GT3B Transmitter installed!!

I purchased the car and radio to do a review and a how-to video on the installation/conversion of the Transmitter and Receiver to the new Fly Sky and now that's everything is done, it's time to sell. The car and transmitter are in perfect condition. Nothing was ever broken and nothing had to be replaced. The car was run through 2 full charges for the purpose of the review and the Fly Sky Transmitter was fully tested after it was installed. Everything is ready to go.

The car is worth $330 with the batteries and charger. Most places do not include both batteries and a LiPo charger. It sells for $399 at Redcat Racing and doesn't include batteries or a charger.

Check it out: http://www.redcatracing.com/RC-Cars/...redder-xb-nbnc

The transmitter sells for $40, but I'm also including 8 AA LiPo batteries ($20 value) for the transmitter!! What an incredible package.

The Shredder XB will come packaged in the original box with the Fly Sky Transmitter conversion completed, ready for you to take out and start running.

Shredder XB Specs:

Motor Type: Electric Brushless
Drive System: 4WD
Length: 670mm
Width: 430mm
Height: 230mm
Wheelbase: 480mm
Ground Clearance: 70mm
Shocks: Oil Filled Big Bore
Speed Control: 80A HobbyWing ESC
Battery: 2 x 3200mAh 20C Lithium Polymer (Included)

FlySky GT3B Specs:
- 10 Model Memory
- Servos NOR/REV
- Steering Trim
- Throttle Trim
- Dual Rate
- End Point
- ABS Settings
- EXP Settings
- Trainer Port (for VRC)
- CE & FCC certified
- 3 Channels

Includes :
- 1 x 2.4Ghz transmitter
- 1 x 2.4Ghz Receiver
- 1 x Bind Plug

You're looking at a $460 value for only $325 plus shipping.


#2 wildone Oct 07, 2012 09:54 PM

Are you excepting any trades?

#3 JHawk19 Oct 09, 2012 05:51 PM

Would prefer cash, but I'll entertain trades.

#4 JHawk19 Oct 09, 2012 08:57 PM

Lowered to $280 plus shipping!!

#5 JHawk19 Oct 10, 2012 08:22 AM

Sold for $280 + $30 shipping this morning!

All times are GMT -5. The time now is 09:39 PM.