RC Groups

RC Groups
    Micro Cars
        Help! Losi Mini Sct

#1 krank1122 Oct 01, 2012 09:02 AM

Losi Mini Sct
Hello everyone,

I have a problem with my brushless Losi mini sct. The problem is with the servo at sometimes the servo stutters. There is also a constant buzzing even when I don't do anything with it at all. I'm just wondering if there's a fix to it or do I have to replace the servo? Check out the video to see what I mean.


Losi Mini Sct (1 min 54 sec)

#2 wparsons Oct 01, 2012 09:33 PM

Sounds fine to me, most modern servos will buzz a bit around center to hold a constant position.

#3 krank1122 Oct 03, 2012 02:47 PM

Will a hitec hs55 servo with a mini t servo saver fit on my losi mini sct?

#4 rcphreak Oct 03, 2012 04:29 PM

the buzz you are getting while turning it all the way is you have your epa too high the remote you have you can dial out some travel so it does not stress the servo as it can only turn so far .
in a nut shell the steering is stoping before the servo so you must adjust the servo travel in order for it not to over stress . and as parson stated unless you pick up the car and take the weight off of it its going to try and center as these do not have a bunch of torq . both are normal sounds .

All times are GMT -5. The time now is 09:37 PM.