RC Groups

RC Groups
    Non R/C Items (FS/W)
        USBASP AVR Programmer for Th9x w/Cables

#1 JimStanmore Sep 21, 2012 06:16 PM

USBASP AVR Programmer for Th9x w/Cables
 
3 Attachment(s)
I was fortunate enough to receive an awesome Th9x programming board today from S_Mack (THANKS!!!) and no longer need the basic USBASP AVR Programmer I was using. This includes the USBASP AVR and cables; it works with Windows 7 64-bit and my Turnigy 9x. I will desolder the internal cable this evening and ship tomorrow.

Includes:
USBASP AVR Programmer (works with 64-bit Windows)
USB cable
Internal cable

I apologize, but due to scammers and freebie scroungers I want to make sure it goes to someone that needs it as much as I did.

Rules:
1. NO PMs
2. First one to demonstrate you know what it is/what it is for and how you would use it by telling us about:
-- a. What you can do with it OR
-- b. How you connect it OR
-- c. Software you use with it OR
-- d. What you would do with it OR
-- e. Why your quadcopter needs it OR
-- f. Something else demonstrating knowledge or involvement.

#2 ritchie_laird Sep 21, 2012 06:35 PM

I have to ask the question, does your TX have an ATMEL processor in it, or is this an improvisation to retrieve or program the tx?

#3 NYbySky Sep 21, 2012 06:46 PM

Is it free shipping? also i could use it to flash new software onto a kk board for my quadcopter

#4 abroadhurst94 Sep 21, 2012 06:49 PM

1 Attachment(s)
I'd like to be considered for this please. I just missed out on the smartieparts board earlier but would really like to upgrade the stock firmware of my Turnigy 9x to ER9X. I've watched a good tutorial on YouTube a while back showing how to solder one of these up properly, so it shouldn't be too hard (famous last words :o)
I know you didn't ask for one, but here's a pic of my 9x to prove I have one:
Attachment 5174162

Regards,
Alex :)

#5 JimStanmore Sep 21, 2012 06:49 PM

Ritchie: Turnigy Th9x with Atmel processor. This is like the old show "What's My Line?" I'm dying to give you a full explanation, but then I would answer a lot of the questions above :-)

Ny: Free shipping, just like s_mack gave me.

#6 ritchie_laird Sep 21, 2012 07:06 PM

excluding myself from the run in the thirst for knowledge. PM'd you Jim.
Quote:

Originally Posted by JimStanmore (Post 22799568)
Ritchie: Turnigy Th9x with Atmel processor. This is like the old show "What's My Line?" I'm dying to give you a full explanation, but then I would answer a lot of the questions above :-)

Ny: Free shipping, just like s_mack gave me.


#7 jdurrell96 Sep 21, 2012 07:09 PM

I just recently gave a USBasp Programmer w/cable away in this forum because I didn't see the need to flash my TX with ER s/w but now I do due, to the limited model memory. After doing a lot more research here and the 9X Forum website I think I would like to reprogram. If anything it sure would make mixing a lot of easier. I'd like to be considered for this. Keep'em Flying !!!!!!! John D.

#8 JimStanmore Sep 21, 2012 07:10 PM

abroadhurst94 its yours. PM me your address. Still free shipping to cross the pond.

#9 JimStanmore Sep 21, 2012 07:12 PM

ritchie, you are classy.

Just to spread a couple of the links I gave you about quadcopters, here are sub-forums that might help with getting started in quads, which is something I may do in the future:

http://www.rcgroups.com/mini-multirotors-800/
http://www.rcgroups.com/multirotor-electronics-792/.


All times are GMT -5. The time now is 02:06 PM.