RC Groups

RC Groups
    Indoor Pattern/F3P
        Discussion ***OFFICIAL Question/Answer thread***

#1 Free Aug 31, 2012 01:58 PM

***OFFICIAL Question/Answer thread***
 
Hi everyone,

I am starting this thread for those(myself included) who have questions relating to foamies!

Questions can range from "how do you do a Snake?" too "Which plane should I get, a MX-2 or a Yak-55?"!

My hope for this thread is that we can gather many experienced pilots and builders to help out the less experienced!:)

I will start with the first question: Are the screw holes on the A10-9L the same distance from the center as on the A20-34S?:confused:

Free:popcorn:



ALL QUESTIONS:

Page 1:
a. Are the screw holes on the A10-9L the same distance from the center as on the A20-34S?
b. How do people like the DX7s?
c. Why don't people setup their Mamo VPP foamies as "airplanes" and run the pitch on the flap or AUX 2 channel?
d. Would it hurt my motor/speed control to try it?
e. Is there a good Mamo VPP set-up guide somewhere?

Page 2:
a. Why would you setup a plane as a heli?
b. Does "wing area" include elevator surface area?

#2 Free Aug 31, 2012 05:28 PM

Am I the only person with questions?:D

Free

#3 rgj Sep 01, 2012 05:02 AM

the questions comes when the winter comes, still we fly F3a outside!
But we looking forward to a "long" winter with 20 degreeds inside .
soon starting to build a Sirius and a lookalike both with dymon and the dualsky with integrated esc, 180 Mah battery aiming to get those under the good 110 gr !

#4 Free Sep 01, 2012 11:35 AM

Good point. Looking forward to the Sirius! Post build pics please.;)

Free

#5 Andycap Sep 03, 2012 02:23 PM

Quote:

Originally Posted by Free (Post 22604630)

I will start with the first question: Are the screw holes on the A10-9L the same distance from the center as on the A20-34S?:confused:

Free:popcorn:

Not even close Axi is 31mm hole centres across the two main mounting holes in the 3 mounting lugs the Hacker is only 21mm diameter and has hole centres at 15mm if I remember correctly

#6 Free Sep 03, 2012 02:44 PM

Thank you!:)

Free

#7 Not Free Sep 04, 2012 10:45 PM

I think this is a GREAT Idea!!:):)

Q: How do people like the DX7s?

#8 mammuth Sep 05, 2012 06:37 AM

Quote:

Originally Posted by Not Free (Post 22643960)

Q: How do people like the DX7s?

That should be interesting :popcorn:

After reading maaaany posts I got to a conclusion that:
If you have one - you love it
If you don't - then you hate it :D

#9 Free Sep 05, 2012 10:44 AM

Q: Why don't people setup their Mamo VPP foamies as "airplanes" and run the pitch on the flap or AUX 2 channel?:confused:

Thanks,

Free

#10 Andycap Sep 05, 2012 01:01 PM

Quote:

Originally Posted by Free (Post 22647775)
Q: Why don't people setup their Mamo VPP foamies as "airplanes" and run the pitch on the flap or AUX 2 channel?:confused:

Thanks,

Free

We want a non linear throttle to pitch mix that on most radios is only offered on Heli modes

#11 Free Sep 05, 2012 02:01 PM

OH, Thanks!

Q: Would it hurt my motor/speed control to try it?:confused:

Free

#12 Andycap Sep 08, 2012 01:42 PM

Your at risk of over revving the MAMO system with huge vibration issues (enough to tear the nose off the model) or overloading the motor and esc without correct throttle and pitch management

#13 Free Sep 10, 2012 11:26 AM

OK, thanks!:)

Free

#14 ALEX HEWSON Sep 11, 2012 06:52 PM

Q: Is there a good Mamo VPP set-up guide somewhere? I think my unit could use a bit of performance tweaking

#15 Andycap Sep 12, 2012 01:42 AM

Theres a whole thread on the Mamo Setup Alex


All times are GMT -5. The time now is 04:43 PM.