RC Groups

RC Groups
    R/C Blogs
        Discussion interesting post on ESC settings

#1 RHTizzy Aug 31, 2012 02:15 AM

interesting post on ESC settings
 
For multicopters we typically all use lipos. The ESCs must be set for NiMh and no or soft cut-off because this makes the ESC low voltage cutoff lower so one or more of them does not decide to shut down in-flight which is always predictably bad ju-ju for multicopters. A throttle surge can be enough to momentarily put an ESC in shutdown mode if the ESC lipo setting is selected. Get a separate lipo alarm and gauge your total flying time minus two minutes reserve power for landing are the best practice methods for multicopter lipo management.

by jesolins (Jim)


All times are GMT -5. The time now is 08:07 AM.