RC Groups

RC Groups
    3D Electric Heli Flying
        Help! how to replace the main gear for Walkera Genius CP?

#1 turnberry Aug 20, 2012 12:45 PM

how to replace the main gear for Walkera Genius CP?
 
I did a research but found nothing. Any tips for how to replace the main gear of Walkera Genius CP?
Thanks in advance!

#2 V999D02 Aug 20, 2012 07:55 PM

I have one of these, and I believe the main gear is press fit onto the shaft.
IE- Just pull at it and wiggle slightly while holding the main shaft above the collar.

#3 turnberry Aug 21, 2012 09:21 AM

Thank you for your information.

#4 Fuzzyguy Sep 02, 2012 06:55 AM

Quote:

Originally Posted by turnberry (Post 22499094)
I did a research but found nothing. Any tips for how to replace the main gear of Walkera Genius CP?
Thanks in advance!

Have one also and it did the exact same thing.Tried gluing with CA but still keeps coming off. Willmhave to try a new gear I guess. If that don't work it's up for sale. Getting tired of trying to rectify design flaws on these things.

Don

#5 Hajile Sep 03, 2012 04:02 PM

Pulling the main gear isn't going to work. It's too soft and you'll just end up bending it.

Get a flat head precision screwdriver, stick it in the gap between the main gear and body (rigght up to the center shaft if possible). And then twist, that'll pry the main gear off the main shaft. Doesn't really take much to remove.


All times are GMT -5. The time now is 09:26 PM.