Gaui Hurricane 425 (500 size Heli) w/ (2) 6s lipos
This is my Gaui Hurricane 425 Heli.***belt drive*** This kit was just built and only has 8 flights. This heli has never been wrecked. (basically brand new, just hovered a few times)
Every electronic component was bought brand new, so everything has 8 flights.
Here are the components
Hyperion DH20X-GC0 (Rudder Servo)
Hi-Tec HS5496MH (Cyclic Servos)
Spartan Quark X (Gyro)
Castle Ice 75
(2) Sky 6S 3000mah 30C (4 cycles each)
Custom Canopy ($59 aftermarket)
CF Blades 425mm
$400 pick-up (Rx ready)
$425 shipped (Rx ready)
Just and FYI, the two pushrods on each cyclic servo must be the same length, even if the pushrods are not square to the servo horn at zero pitch, or the servo will be overloaded at the limits. It doesn't look that way, especially on the pitch servo (left side servo).
Looks like a good package. Good luck with the sale.
They are the exact same length, but I see what you are saying. In the pic, it looks like one is shorter than the other. :)
I might be interested in the airframe only. Please let me know..
Would you be interested in selling just the lipos?
Let me know, I will send you a PM as well.
|All times are GMT -5. The time now is 10:06 AM.|