RC Groups

RC Groups
    3D Foamies
        Discussion 3D Hobby Shop 40" Edge 540 Epp Full Fuse

#1 skarface Jul 17, 2012 08:08 PM

3D Hobby Shop 40" Edge 540 Epp Full Fuse
 
It is here! http://www.3dhobbyshop.com/40-EPP-Edge_p_16186.html

Here are some pics.
http://3dhs40edgeepp.shutterfly.com/

If you listen to the video starting at 4:10 Joe is talking about the setup he is using in this video.
3D Hobby Shop 40" EDGE 540 EPP Fun pilot Joe Smith (4 min 57 sec)


Night flying videos:
http://www.youtube.com/watch?feature...&v=jKD3coF8sMg
http://www.youtube.com/watch?feature...&v=Hfttf_gY61o


Build Manual!
https://3dhobbyshop.3dcartstores.com...anualemail.pdf

Required Equipment:
Power System:

Omega 72g 1100KV Lightweight Setup
Use with 11x5.5 prop and 3S 1000-1600mah lipo.

Omega 103g 1030KV More Power Setup
Use with a 12x6 prop and 3S 1000-1600mah lipo.

ESC:
Use AirBoss 45A or Hacker X55 or Castle ICE Lite 50A.

Servos:
Qty. 4 Hitec HS-65MG
Servo Extensions:
Qty. 2 12 inchQty. 2 4 inch

Have fun and fly low!:D

#2 zmonster97 Jul 17, 2012 08:16 PM

Can't wait for this plane! Will most likely be getting one.

#3 skarface Jul 17, 2012 08:20 PM

Same here, will be putting my old 42" slick guts in it, which are 103g omega, 4x hitec 65mg's, and hacker x-40. I would like to put a ice 50 in it but don't know yet.

#4 Park_aviator Jul 17, 2012 09:12 PM

Subbed! I'll be throwing my 42" gear into this if I can't sell it!

#5 skarface Jul 17, 2012 09:34 PM

Quote:

Originally Posted by Park_aviator (Post 22193778)
Subbed! I'll be throwing my 42" gear into this if I can't sell it!

Don't sell the gear, you sell it you know you probably won't get a 40" after that. So keep the gear and then for 100$ or less you will have another sweet plane and it's more crash proof than a balsa.;) I think this plane will be the new buck huck or maybe even 90$.:)

#6 Park_aviator Jul 17, 2012 09:40 PM

Quote:

Originally Posted by skarface (Post 22193983)
Don't sell the gear, you sell it you know you probably won't get a 40" after that. So keep the gear and then for 100$ or less you will have another sweet plane and it's more crash proof than a balsa.;) I think this plane will be the new buck huck or maybe even 90$.:)

Thing is, I still have all my gear from my 41" Edge...

#7 skarface Jul 17, 2012 09:41 PM

Quote:

Originally Posted by Park_aviator (Post 22194028)
Thing is, I still have all my gear from my 41" Edge...

Oh well then your good to go. But I will be putting a 103g on this plane, so you should sell the 41" edge gear, keep the 42" slick gear.;)

#8 Park_aviator Jul 17, 2012 09:49 PM

Quote:

Originally Posted by skarface (Post 22194058)
Oh well then your good to go. But I will be putting a 103g on this plane, so you should sell the 41" edge gear, keep the 42" slick gear.;)

Yeah, I want to do that, but no one wants to buy it.... I'm trying to sell my DX6i, 41" Edge electronics, and my 42" Slick since I bought a 51". This thread is already off topic because of us bro! :p

#9 skarface Jul 17, 2012 10:14 PM

Haha maybe.:rolleyes:

#10 nickelbn1 Jul 20, 2012 10:20 AM

Definitely interested in this plane

#11 cale10 Jul 20, 2012 11:14 PM

ITS HERE!

http://www.3dhobbyshop.com/40-EPP-Edge_p_16186.html

#12 skarface Jul 20, 2012 11:27 PM

Quote:

Originally Posted by cale10 (Post 22222504)

I know.:) I will update this page tomorrow.:)

#13 Park_aviator Jul 20, 2012 11:30 PM

Quote:

Originally Posted by cale10 (Post 22222504)

yes!

#14 AZAerobat Jul 21, 2012 02:24 AM

Quote:

Originally Posted by cale10 (Post 22222504)

Got my hopes up! I was hoping for a pre-order. Hopefully soon I am really looking forward to this plane. It will become my second night flier but with the Aurora kit I bought. Oh man need to calm down too excited!! Guess the next question is 72g or 103g. I think I am going to go 103g just to have the extra power. What are the max amps the 103g pulls?

#15 zmonster97 Jul 21, 2012 10:17 AM

I have the same problem too. 103g or 72g. Will the 103g be too heavy with an 1800mah battery?


All times are GMT -5. The time now is 06:22 PM.