RC Groups

RC Groups
    Multirotor Talk
        Discussion new to multirotor's bought my first tri copter

#1 dmooney Jul 15, 2012 07:44 AM

new to multirotor's bought my first tri copter
 
Hi all,
Dan's the name im pretty new to rc aircraft so not sure if I have jumped unto the deep end.

some pics below and will post specs soon.
When learning to fly should I just copy the basic training and Introduction to flying that is given to a standard heli?

My custom built Tri Rotor (1 min 46 sec)

http://i31.photobucket.com/albums/c3...s/DSC_0080.jpg

#2 Adidas4275 Jul 16, 2012 08:10 PM

looks good.....

start with tail in... learn to do circles with the tail always facing you....

take it slow.

Take off, then land.... repeat 100x

take off go forward and then come back... then land x100

take off, go left, come back and land x100
take off go right come back and land x100
take off, do a clockwise circle, land x200
take off, do a counterclockwise circle, land x200
take off, do a figure 8, land x200

then do the same nose in (nose pointing towards you)

dont take off and try and fly circles and such, it will end poorly

#3 sirbow2 Jul 16, 2012 11:09 PM

+1 thats basically what i have done with my quad :) but only up to the "counterclockwise circle" and only ~10 times :D

#4 Adidas4275 Jul 16, 2012 11:15 PM

yeah... muscle memory is the magic pill.... we dont have time to think when flying.... (i dont)

it took me a while to get there.... i started flying a blade MCX and learned to fly on that


All times are GMT -5. The time now is 06:08 AM.