TX battery help - Eurgle 9x & Dragonlink
I have an eurgle 9x radio and have been using a life 1500mah 9.9v battery from new. It works fine. No complaints.
I now have a dragonlink UHF running off the pins when i remove the 2.4ghz module. It works fine too.
But im looking at getting the best battery solution for running these two.
I have read some people use a 3s lipo, turnigy have 2650mah packs, some say great, some say too much voltage. I've also read some people use sanyo eneloop nimh packs too, much safer and still 2000-2500mah.
What battery do u guys recommend using to run the TX & Dragonlink.. Id like the longest lasting option between charges, so as to not run into unexpected dramas in the field.
Thanks in advance
No one, surely there is someone out there who uses a 9x with dragonlink... :P
|All times are GMT -5. The time now is 07:20 PM.|