RC Groups

RC Groups
    R/C Blogs
        Mini-HowTo Kyosho F-4 Phantom modified

#1 FLOEY Jun 07, 2012 01:09 AM

Kyosho F-4 Phantom modified
 
2 Attachment(s)
Long time since I updated my blog. Mostly flown RTF planes no time for own
designs.

Since the Kyosho EDF's are discontinued products, modifications
may have a limited interest therefore I decided to do a blog entries
instead of a new threads in Foamy EDF's.

Link to my Kyosho A-6 Intruder thread
http://www.rcgroups.com/forums/showt...ight=kyosho+a6

After I successfully had modified the A-6 I found a cheap Kyosho F-4 with
a similar split duct. After some testing I found that the split ducting in the F-4 was not realy a big problem as it was in the A-6.

Link to old F-4 threads
http://www.rcgroups.com/forums/showt...ght=kyosho+f+4
http://www.rcgroups.com/forums/showt...ght=kyosho+f+4
http://www.rcgroups.com/forums/showt...ght=kyosho+f+4

Main problem with the F-4 is the CG. To get a perfect CG servos has to be moved see photo.

Also the fuselage is not realy well built see mod of reinfocement/inlet ducting.

All up weight with 1000mah 3S 35C LiPo about 415g. Thrust with non stock
Haoye 55x42 fan 420g


All times are GMT -5. The time now is 06:40 AM.