| #1 scatsob
||May 13, 2012 09:14 AM
25" and 26" Carbon Fiber RC Propellers PT Model mejzlik w/ 4 1/8" & 4 1/4" spinners
I got these with a motor I reciently bought but will not be using them. There are three PT Model carbon propellers and one mejzlik carbon e-prop. Two of the PT Model props are 25x10 and the third is a 26x8w. The mejzlik is 26x10. The 26x8w looks like it has been sanded with fine grit sandpaper and all three PT Model props have velcro epoxied to the hub on one side. All four props are drilled out for 12mm shaft and have four holes 1.25" apart for mounting. The spinners are BB Model. One is 4 1/8" and the other is a little over 4 1/4". One of the spinners is missing the screws that hold the cone on the backplate, but they can easily be found at an ACE or similar hardware store. They are drilled the same as the propellers and are cut for them as well. Also included is the drill bit used to cut the shaft holes in the propellers and spinners. I would like to get $200 shipped for the lot.