RC Groups

RC Groups
    Indoor Pattern/F3P
        Discussion Hacker RT Sirius Eleven F3P

#1 aglenn Apr 23, 2012 08:10 AM

Hacker RT Sirius Eleven F3P
6 Attachment(s)
Hey Guys,

Received my Super Sirius 12 a couple of days ago. I opened the kit and noticed how great the quality was on the model. The milling was exceptional along with the screen printing. All the slots for the carbon and everything was precut for you and ready for you to cut the correct size carbon and slide everything together. The airplane went together on a build fairly quickly. I actually ended up doing most of the build at my desk at work (Horizon Hobby). The airplane can by fully built in a couple of hours with your full attention just about everything on the airplane is done for you from the box. The landing gear actually comes premade from the box with the wheels and everything already installed.

My Setup includes:

-Hacker A10-15s with a SG 9 x2.8 wide bladed prop
-Hacker X5 esc
- Jr 188 HV servos on the tail feathers
-Jr 290g on ailerons.
-Thunder Power 2cell 250mah battery

I built the kit 100% stock with all of the special aerodynamic aids on it. I also did the negative anhedral tail on the model as I found a while back with foamies that doing that will help with the tail squatting down when pulling out of vertical down line maneuvers. I found that with this model it also kept it from having that behavior. I found that in knife edge the model was very neutral flying in just about every aspect. I found that the CG needed to be about 225mm back from back from the nose.

#2 aglenn Apr 23, 2012 08:22 AM

12 Attachment(s)
More Pictures

#3 ChrisBowker Apr 23, 2012 08:32 AM


#4 Jurgen Heilig Apr 24, 2012 11:35 PM

Link to other Sirius Eleven thread:


:) Jürgen

#5 Gene Genie May 01, 2012 03:56 AM

Just purchased the combo deal, now waiting on the postman

#6 markcanon Nov 30, 2012 03:02 PM

Hi guys does anyone know the current draw of the combo setup and will the red bec do or does it need to be micro deans?

#7 edin Dec 12, 2012 08:21 AM

hi i don't know u can ask experts i am not experts..
classified website

All times are GMT -5. The time now is 04:00 PM.