RC Groups

RC Groups
    Aircraft - Electric - Jets (FS/W)
        Sold Super falcon 120 NIB with nacelle and mounts

#1 Fidelity101 Apr 05, 2012 09:56 AM

Super falcon 120 NIB with nacelle and mounts
 
I bought the arf from nitro planes and then purchased the air Sally nacelle, cf mounts and cf stiffeners from air Sally. I also have the after market canopy after reading the thread in this forum about the weakness of the original.

Now that I'm all set to build my own, I'm buying a used one and no longer need any of it. I paid 175 for the arf and I forgot what I paid for the air Sally gear but I'm thinking 275 range. Canopy was 20-25. I would like to get 250 for everything plus shipping and prefer local pickup.

#2 eli5539 Apr 05, 2012 10:19 AM

Could you post a couple of picks

#3 lilbutch Apr 05, 2012 12:04 PM

question for you. what size motor and fan setup do these take if going sparkie? (butch)

#4 Fidelity101 Apr 05, 2012 01:59 PM

Sparky? If you go nitro, a 1.20 os as works great and I can sell one to go with it. If going electric ducted fan, 120mm fans fit the nacelle. My nacelle was designed for the xps fan which is a dynamax fan...but you can use any 120mm fan with slight modification.

Hopefully I answered your question. I will upload pictures tonight when I get home.

#5 AIR SALLY Apr 05, 2012 06:30 PM

the nacelle fits a dynamax ...127mm .

#6 Fidelity101 Apr 05, 2012 06:49 PM

2 Attachment(s)
Thanks Air Sally. All three carbon fiber components were custom build by Air Sally, who did an amazing job!

Uploading pictures for those who asked.

I'm only selling these items because I just purchased a completely built model from someone else in rcgroups.

#7 AIR SALLY Apr 05, 2012 11:32 PM

this will make some one a mighty fine big ,sweet flying jet :cool:

#8 Fidelity101 Apr 06, 2012 07:24 PM

Air Sally's gear is amazing!

I am not willing to split up the gear at this time. The nacelle goes for $189 from xps products and I think the supports and mounts add up to more than I'm asking before you add the arf.

#9 erh7771 Apr 08, 2012 11:49 AM

Pm sent

#10 Fidelity101 Apr 08, 2012 12:38 PM

I know the typical mindset for most of us is to try and ask for a lower price than advertised, but I did not build fluff into the initial asking price. After researching the parts, I'm kicking myself for such a low price as it is. I will not sell for less than $250. If there are no buyers, I'll gladly keep it as replacement parts, but I can't sell something brand new for less than what I'm already asking, which is WELL below 50% of the original value.

Quote:

Originally Posted by erh7771
Thread: Super falcon 120 NIB with nacelle and mounts

Quote:

Originally Posted by Fidelity101 (Post 21243722)
I bought the arf from nitro planes and then purchased the air Sally nacelle, cf mounts and cf stiffeners from air Sally. I also have the after market canopy after reading the thread in this forum about the weakness of the original.

Now that I'm all set to build my own, I'm buying a used one and no longer need any of it. I paid 175 for the arf and I forgot what I paid for the air Sally gear but I'm thinking 275 range. Canopy was 20-25. I would like to get 250 for everything plus shipping and prefer local pickup.

Would you take 250 shipped to 75054?


#11 Fidelity101 Apr 08, 2012 12:42 PM

After researching the parts and recalling what I actually have in these items, I am kicking myself HARD for asking only $250 before shipping. Air Sally's gear is top notch material and his items alone are worth $250 or more. The Canopy upgrade is a must have if you're going to install a turbine or EDF unit as the stock one is simply to thin...based on what I've read from others.

I am taking this sale down because I have a possible local buyer.


All times are GMT -5. The time now is 09:42 AM.