RC Groups

RC Groups
    Aircraft - Electric - Airplanes (FS/W)
        For Sale 3DHS 59" Slick RX Ready LPU - Norther Virginia, MD, DC area

#1 SalamSyed Mar 19, 2012 01:02 PM

3DHS 59" Slick RX Ready LPU - Norther Virginia, MD, DC area
 
11 Attachment(s)
Up for sale is one of my favorite 3DHS 59" Slick with less flights on it. No scratches, wrinkles, no hard landing and no issue with the plane. I am a good and a careful builder and also a 3D flyer so I know how to build a nice 3D plane, also take good care of them.

I have too many planes and also too many from 3DHS so this one has to go to fund a bigger project. Would never sell it if I have the money for my bigger project.

It has a Motrofly 3620-750, Castle Ice 100, HS-225MG servos all around with all hardware including pull-pull setup upgraded to Dubro 256 ball link (440 link rods). The plane is setup for 4S and has a nice 15x7 Vox wood prop with no bad habits, no visible KE coupling, hovers at mid-stick and has crazy unlimited vertical performance. One of the best 3D plane in this size.

$550 for RX ready and I will throw in a free lightly used 4S battery and a new 15x7 Vox prop as compliment. Willing to drive 50 miles.

I live in Springfield, VA, fly at the FARM near Warrenton, VA, CCRCC near Brandywine, MD and can also stop by at Fredericksburg RC during weekends.

I don't think I can ship it.

Here are some photos:

#2 BoneziAm Mar 19, 2012 01:35 PM

OH, how i wish u posted this in about 3 weeks, I'll have my funds together by then..

Nice plane.. exactly what i want.

#3 SalamSyed Mar 19, 2012 01:41 PM

Quote:

Originally Posted by BoneziAm (Post 21079730)
OH, how i wish u posted this in about 3 weeks, I'll have my funds together by then..

Nice plane.. exactly what i want.

If you commit to buy this with some sort of a token money then I can keep it for you for the next 3 weeks. You pay in full and take the plane. Let me know if you like this arrangement. I am happy to help in any possible way I can.

#4 BoneziAm Mar 19, 2012 04:47 PM

Quote:

Originally Posted by SalamSyed (Post 21079787)
If you commit to buy this with some sort of a token money then I can keep it for you for the next 3 weeks. You pay in full and take the plane. Let me know if you like this arrangement. I am happy to help in any possible way I can.

Thanks for the offer but i don't want to keep you from fast buyer..I will keep track of it until its sold...
I do wish i had the funds now, my brother is driving down from Baltimore this weekend,,,would have been perfect

#5 Reaper802 Mar 19, 2012 08:52 PM

PM sent.

#6 rpstar Mar 20, 2012 08:59 PM

Hey Salem, any video of it flying on 4s? I usually see 6s on a plane this size. I'm thinking of getting a 60" EF Extra or something this summer. Very nice.

#7 SalamSyed Mar 20, 2012 09:09 PM

Quote:

Originally Posted by rpstar (Post 21094030)
Hey Salem, any video of it flying on 4s? I usually see 6s on a plane this size. I'm thinking of getting a 60" EF Extra or something this summer. Very nice.

IMO a 4S for the Motrofly 3620-750 on a 15x7 is quite enough power to pull any 3D stuff. It hovers at mid-stick and just a little more than that and you exit from a hover. Here is a hover video recorded during its maiden flight.

IMG 0138 (1 min 35 sec)


I have a PA Extra MX (58") which has a 6S setup and that is a balistic power but mainly due to the weight of the airframe and its design.

#8 SalamSyed Mar 20, 2012 10:55 PM

Pending payment.

#9 SalamSyed Mar 26, 2012 11:25 PM

Sold to Reaper802. Thank you very much.


All times are GMT -5. The time now is 04:24 AM.