RC Groups

RC Groups
    Aircraft - Electric - Multirotor (FS/W)
        Sold Blue Sky RC Micro Quad

#1 cryhavoc38 Mar 18, 2012 01:55 AM

Blue Sky RC Micro Quad
 
4 Attachment(s)
Built this for the heck of it, flew it twice in the house and just moving on to the next build.

Its equipped with all new parts that include
4 2000kv 10g Power Up 180 motors and prop adapters from headsuprc.com
http://www.headsuprc.com/servlet/the...0-Sport/Detail
http://www.headsuprc.com/servlet/the...r-2.0mm/Detail

4 hobbywing flyfun 6amp esc's from hobbypartz.com
http://www.hobbypartz.com/hobbywing6aair.html

Blue Sky RC micro quad frame
http://www.blueskyrc.com/index.php?m...1add48f4a9d41a

True KK+ 5.5d board with LCD screen and is loaded with Mike Barton's XX firmware from www.multircshop.com
This board is the one with the power bus built in. I've soldered the speedo's and the battery cable to the bus.

Gens Ace 3s 1300 25c lipo
http://www.hobbypartz.com/98p-25c-1300-3s1p.html

Nylon standoffs from multiwiicopter.com and the nylon screws from the blueskyrc.com's micro hexa kit

Both the main power cable and the battery are equipped with an XT60 connector

You will want to replace the gemfan 5x3 props that are installed. I didn't care for them as they are pretty thin and flimsy. In this case, I think the GWS 5x3 props are stiffer. I will send this with the Gemfan props and a couple spare props.

You will need to balance whatever props you use and then perhaps tweak/tune the gyro's via the lcd screen and your transmitter.

No receiver will come with this unless you fly Futaba Fasst, and then I can include the Futaba 4 channel micro receiver for an addtional $25.

Price without the Futaba Fasst receiver is $115 shipped usps priority mail to anywhere in the CONUS, AK, HI and PR
with the futaba receiver $140 shipped.

Paypal with no fee to the buyer.

PM or email me with any questions
thanks

#2 rc4life85 Mar 18, 2012 02:24 AM

pm sent

#3 willyjoe73801 Mar 18, 2012 07:21 AM

still for sell young man? next in line if it is. tyu

#4 Old Blade Man Mar 18, 2012 08:00 AM

pm'd


All times are GMT -5. The time now is 05:26 AM.